DN50-DN400 Gate Valve with Rising Stem Strength Sealing Test Port Size DN50-DN400
|
...gate valve is rated at a Nominal Pressure (PN) of 1.6 MPa, ensuring optimal performance under moderate pressure conditions. Whether used in water supply systems, oil and gas pipelines, or other industrial settings, this gate valve delivers consistent and efficient flow control. Operating within a working temperature of up to 80°C, this gate valve......
Shanghai Jianggong Valve Manufacturing Co., Ltd.
|
DN50 - 1600 mm Electric / Manual Flanged Gate Valve /Sluice Valve For Hydropower Project
|
...full close to block fluid in the pipeline. The gate is usually wedge shaped. When the valve is wide open, the gate is fully drawn up into the valve, leaving an opening for flow through the valve the same size as the pipe in which the valve is installed....
Hangzhou Hydrotu Engineering Co.,Ltd.
|
DN50 2 Inch Handwheel Cast Steel Gate Valve Cl 150 Rf LCB LCC CF8 CF8M 4A 5A
|
DN50 Gate Valve API 600 WCB 2 Inch Cl150 Handwheel Rf Flanged Full Bore Cast Steel Gate Valve LCB LCC CF8 CF8M 4A 5A General Introduction: VERVO Cast gate valves are offered by default with flexible gate, renewable seat, rising stem and non-rising hand wheel. It plays the role of pipe opening and closing ultimately through the rotation of the hand wheel to drive the lifting of gate......
ZHEJIANG VERVO VALVE CO.,LTD
|
PN10 PN16 Resilient Seated Gate Valve With Rising Stem For Energetics Pipe
|
... Applicable medium: Clear water or water-like medium Pressure Rating: PN16 Size: DN50-DN2000 MOQ: 10 Cast steel gate valves CLASS 150~1500LB CAST STEEL GATE VALVE Flexible Wedge Gate Valve,Solid Wedge Gate Valve Bolted Bonnet,Threaded or welded seat ring,...
TOBO STEEL GROUP CHINA
|
A105 Flange End ANSI Gate Valve , DN50 Rising Stem Gate Valve
|
...DN50 Flanged Gate Valve Introduction The opening and closing part of the forged steel gate valve is the gate, and the movement direction of the gate is perpendicular to the fluid direction. The forged steel gate valve can only be fully opened and closed, not adjusted and throttled. The gate of forged steel gate valve......
China • Yuanda Valve Group Co., Ltd.
|
Mining Industry DN50 Manual / Pneumatic Actuator Knife Gate Valve
|
...gate valve,lug type/wafer type Technical Data Sizes: DN 50 to DN 600 (larger diameters on request) Seat Material: Resiliant: PTFE/EPDM/NBR Metal: Tungsten Carbide/Satellite/304/316 Pressure: 1. Lug water knife gate valve:DN50-DN600 Pressure rating:DIN PN10,PN16,ANSI 150 2. Wafer thtough conduit knife gate valve:DN50......
COOSAI valve group
|
High Performance DN50 - DN600, PN10 / 16 / ANSI 125, GG25 / GGG40 Fire Gate valve
|
|
High Performance DN50 - DN600, PN10 / 16 / ANSI 125, GG25 / GGG40 Fire Gate valve Size:Dn50-DN600 Pressure:PN10/16/ANSI 125 Insepction:API598 Flanges:Ansi b16.5 Bs4504 En 1092 Size:Dn50-DN600 Pressure:PN10/16 Temperature:0-80℃ Material:GG25/GGG40...
Shenzhen Chongxi Precision Metal Products Co., Ltd
|
Stainless Steel Pneumatic Knife Gate Valve DN50-1000mm Used In Papermaking Petrochemical Mining Drainage
|
... knife gate valve and a pneumatic actuator. The bottom of the gate is a knife-shaped oblique cut, which has a good shearing effect, so that the valve is not blocked by the medium when it is closed, and can scrape off the adhesive on the sealing surface and...
Handan Shengnada New Material Technology Co., Ltd.
|
Ductile Iron Soft Seated Gate valve Flange End DN50-DN800
|
...Gate Valve Flange End DN50-DN800 1.PRODUCT PROFILE Soft seated gate valves, in ductile iron with flat body and EPDM covered wedge.Traditional gate valves often have water leakage and corrosion. In order to overcome this shortcoming, the soft seated gate valve appeared. As an updated product of the traditional gate valve, the soft seated gate valve......
Anhui Prosper Flow Technology Co., Ltd
|
DN50 PN10 No Rise Stem Manual Gate Valve Ductile Iron Cast Steel Stainless Steel For Water Conservancy
|
DN50 PN10 Ductile Iron Cast Steel Stainless Steel No Rise Stem Manual Gate Valve For Water Conservancy Product Introduction The gate valve is a kind of valve that opens and closes through the ram, and its working principle is based on the function of the ram moving vertically along the axis of the valve seat to achieve the function of full opening or closing, and cannot be used for regulation and throttling. Gate valve......
Henan Lianghe Pipeline Equipment Co.,Ltd
|
Submit your “dn50 pipe gate valve” inquiry in a minute :