Isolated Power Weighing Transmitter With 4/6-Wire Load Cell Support DT301
|
Features& Applications Panel-mounted design for convenient operation. Supports weight-free calibration. Compatible with both 6-wire and 4-wire load cell connections. Operated via 4 touch buttons for simple setup and adjustment. Analog outputs: ±10V and 4–......
Brans Measuring And Controlling Technology Co., Ltd
|
Isolated analog weighing transmitter
|
...
Hangzhou lizhi electronic technology co.,Ltd
|
Car Voltage Isolated Fast Charging Transmitter Coil Wireless Charging Module with Wide Voltage Input and Foreign Object Detection
|
... wide voltage input compatibility and electrical isolation for enhanced safety. Core Functions Core Energy Conversion: Converts and amplifies vehicle power supply (12V DC) into high-frequency AC power through built-in inverter circuitry, driving the...
Shenzhen Zhixiangyuan Electronics Co., Ltd.
|
DIN Rail Mounting Digital Weighing Transmitter With Standard Dimension
|
mounting on DIN rail digital weighing transmitter with the standard dimension Alarm for low battery and auto power off at low battery Optional of RS232 interface with selectable baud rate and communication method Optional of scoreboard interface sending......
NOVO(XIAMEN)TECHNOLOGY CO.,LTD.
|
4-20mA Converter AC Type Current Digital Signal Isolator Perforation Current Transmitter
|
Input Input current range: AC 0.5-150A Frequency range: 40Hz-60Hz Output Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V Output load resistance: RL ≤ 500Ω (when the output is a current signal); RL ≥ 10KΩ (when the output is a voltage signal) Basic parameters ......
Shenzhen Qianhai Lensen Technology Co., Ltd
|
5-Digit LCD Differential Digital Pressure Gauge 9V Battery powered Pressure Transmitter
|
BPZ2008 Pressure Gauge/Switch Introduction: The BPZ2008 digital differential pressure gauge is a moisture-proof gauge with media isolation, designed for measuring non-corrosive gases and liquids. It utilizes a piezoresistive diffused silicon sensor and ......
Baoji Hengtong Electronics Co., LTD
|
Chenzhu Industrial Isolated Signal Transmitter 4-20mA Current Transformer
|
...isolated safety barrier The analog input isolation barrier provides isolated power supply to the transmitters in the hazardous area, isolating and transmitting the current generated by the transmitters from the hazardous side to the safe side, and supports bidirectional transmission of HART signals. This product requires independent power supply, with three isolations for power......
Xi'an Bairui Electrical Technology Co., Ltd.
|
Compact IP65 RS485 M02 Weighing Indicator Transmitter
|
Digital Weighing Transmitter with RS232/485 and analogue output (optional) M02, a compact yet powerful panel mounted weighing indicator designed to meet all basic weighing needs, whosereliability and digital filtering shows the ability to perform under ......
Shanghai Conhon Electronic&Technology Co.,Ltd.
|
high accuracy isolation transmitter 0-10V to 4-20mA/0-5V/0-10V(AC220V/DC24 power supply )
|
...three-port isolation (input, output and power supply ) ◆ 1-input- 2-output ,isolated between channels ◆ High accuracy (0.1% F.S, 0.2% F.S) ◆ High linearity (0.1% F.S) ◆ High isolation voltage (2500VDC/60S) ◆ Low temperature drift (35PPM / ℃)...
Isolation transmitter|isolation amplifier|analog isolation amplifier
|
WAYJUN 3000VDC isolation Speed signal isolation transmitter, sine wave shaping green DIN35 signal converter
|
...isolated converter | Signal Conditioner Features: >> Differential signal/pulse signal isolated transmitters >> Support A, B, and Z three-phase differential simultaneous conversion >> No change the original waveform frequency, response speed is over 500KHz >> Three-isolation:signal input/Power/signal output 3000VDC >> Power supply: 5V, 12V, 15V or 24V DC single power......
Shenzhen WAYJUN Industrial Automation
|
Submit your “dt301 isolated power weighing transmitter” inquiry in a minute :