Test Speed 10~60rpm Earphone Cable Bending Testing Cable Bending Cycle Tester
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some...
Infinity Machine International Inc.
|
6 Station Wire Testing Equipment For Robot Cable Bending Test Cria 0003.2
|
...Cable Bending Testing Equipment, 6 Station CRIA 0003.2 Wire Testing Equipment Application: The robot cable bending testing equipment conforms to TUV, VDE and UL. It can be used to test bending of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine is a six-station structure, which is mainly used for repeated bending test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Six Station Cable Bending Test 360 Degrees / Bend Test Machine 500 Watt
|
... Test speed: 5-60 times / minute adjustable 4. Test times: 99999999 times 5. Rotation mode: forward rotation mode, reverse rotation mode, positive and negative rotation mode 6. Test mode: life test, continuity test 7. Counterweight: 50g,100g ,200g ,300g ,...
Shenzhen Mingyu Instrument And Equipment Co., Ltd.
|
Appendix F Of TÜV Rheinland 2Pfg 2577/08.16 Robot Cable Bending Testing Machine
|
... system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the bending test of...
Sinuo Testing Equipment Co. , Limited
|
IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
UL 817 Wire Swing Bending Machine Cable Bending Test Machine
|
...power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. 2.Specification Test rate 10-60 times/min adjustable Bending Angle 10 ° to 180 ° is adjustable Work station 6 plugs and...
DONGGUAN LONROY EQUIPMENT CO LTD
|
UP-4040 Pulg Wire Swing Cable Bending Testing Machine For Electrical Wire
|
... Pulg Wire Swing Cable Bending Test Machine for Electrical Wire Description: Wire bending and swing testing machine, also known as wire bending and swing testing machine, is an abbreviation for swing testing machine. This testing machine complies with the ......
Dongguan Youbi Test Equipment Co.,Ltd
|
10-60 Times/Min Cable Flex Tester , 6 Station Cable Bending Testing Machine
|
...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the...
Sinuo Testing Equipment Co. , Limited
|
Mine Cable Bending Testing Machine Is Applicable To The Testing Of The Bending Performance Of Mining Cables
|
...testing of the bending performance of mining cables and complies with the requirements of Article 5.8.8 (Appendix D) of GB12972.1. The radius of the sample bending fixture: R150±10mm, 200±10mm, and R250±10mm can be replaced. Test speed: Adjustable from 0.1 to 1m/s. Sample length: For type 05, samples can be made in lengths of 2M, 3M, 4M and 5M. Type 010 can be used to test......
Dongguan Chengfeng Testing Equipment Co., Ltd
|