IEC61032 IEC60529 IEC60335 IEC61029 Electric Shock Test Probe B IP2X
|
...Electric Shock Test Probe B IP2X Bending test IEC61032 IEC60529 IEC60335 (Test probe B) is the necessary implement in protection against electric shock test for household and other have similar matter electrical appliances This is the “International” test finger required by most IEC61032 test probe......
KingPo Technology Development Limited
|
IEC 60335-2-9 Electrical Appliance Testing Equipment Toasters Abnormal Operation 500 Times Endurance Test
|
... requirements for grills, toasters and similar portable cooking appliances“ clause 19.101 Samples and Restrictions: Toasters. Application: It is used to test toasters’ breaking capacity and endurance that toasters are operated at rated power input and...
Sinuo Testing Equipment Co. , Limited
|
Scratch Resistant Pin Electric Safety Testing Probes IEC60335-1 Clause 21 Electrical Solid Insulation
|
Scratched Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the ......
Guangzhou HongCe Equipment Co., Ltd.
|
Electrical Multimeter Test Probes Gold Plate Wire Pen Cable Red + Black
|
...Test Probes For Digital Multi - Meter Features Probe Pen length 148mm/Probe Pen nib Ø2mm Probe Pen plug: Ø4mm cross plug, Right angle Probe Pen Wire: 20AWG, length 1000mm, Red/Black Safety Rating: EN61010-031, 1000V CAT. Ⅲ/600V CAT. Ⅳ, MAX 10A DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe......
Guilin Huayi Peakmeter Technology Co., Ltd.
|
IEC60335 Electrical Safety Testing Probe Pin For Scratch Resistance Test
|
...Electrical Safety Testing Probe Pin For Scratch Resistance Test IEC60335-1 Clause 21 Scratched Pin For Scratch Resistance Test Of The Electrical Solid Insulation Surface Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test......
Dongguan Kingpo Technology Limited
|
Touch Screen Material Standard Needle Flame Tester for Electrical Appliance Test
|
...Electrical Appliance Test Application scope: Research, production and quality inspection departments of lighting, low-voltage appliances, household appliances, machine tool appliances, motors, power tools, electronic instruments, electrical instruments, information technology equipment, electrical affairs equipment, electrical connectors, accessories and other electrical......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Clean Electrical Appliance Testing Laboratory Global Product Certification
|
...Appliance Testing is a comprehensive testing and certification service provider for home electronics. It provides safety performance testing, electromagnetic compatibility (EMC) testing and other testing services, as well as certification services such as CE/ FCC/ ROHS/ FDA/ CB/ UL/ PSE/ CCC. It covers a wide range of home appliances, including televisions, refrigerators, and microwave ovens. With its advanced testing...
Global United Technology Services Co.,Ltd.
|
Scratch Resistant Pin Electrical Safety Test Probe of IEC 60335-1
|
...standard requirement of IEC60335-1 clause 21. Test method: Make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 62196 Electric Vehicle Test Probe
|
..., and For Electric Vehicles" clause 26.6. Equipment Overview This 75N test rod is required by Conforms to IEC 62196-1Ed.4CDV 2020 clause 26.6. Test principle: One plug contact of the same system is applied for 1 min with a force of 75 N against the...
Sinuo Testing Equipment Co. , Limited
|
IEC60335-2-14 Household Appliance Test Equipment Probe With 125mm Diameter Stop Face
|
...Appliance Test Equipment Test Probe With 125mm Diameter Stop Face Standard: IEC 60335-2-14 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines clause 20.2; IEC 61032 Protection of persons and equipment by enclosures – Probes for verification. Application: It is used to test stability and mechanical hazards for blenders, detachable parts. The test is carried out with a test probe...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Submit your “electrical appliance testing probe” inquiry in a minute :