Hydraulic Power Fatigue Resistant Tank Jacking Equipment for Grain Storage Silos
|
LYT-type hydraulic jacks is composed of one-stage double-acting hydraulic cylinder, pulley block, load-bearing chain and oil way etc. Moveable pulley is used to enlarge chain stroke, i.e. traveling distance of the cylinder is 1/2 of lifting distance of ......
Wincoo Engineering Co., Ltd.
|
ISO 18895 EN 12958 Footwear Testing Equipment Shank Fatigue Resistance Tester
|
...Equipment Shank Fatigue Resistant Tester Production information Shank fatigue resistant test is suitable for the test shoes with the core of the resistance to fatigue. The principle is the core of both ends with two sets of clamps fixed, and subjected to a certain amount of force applied to the fixture at the core frequency per second, four cycles reciprocating bending......
SKYLINE INSTRUMENTS CO.,LTD
|
240 cpm Footwear Testing Equipment Shoe Steel Shank Fatigue Resistance Tester
|
... shanks to fatigue. The test is made by repeatedly bending the specimen. It will stop automatically when the predetermined number of tests has been reached or the specimen breaks. 4. Test standard:GB/T 3903.35-2008,......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
BS EN 12983-1 Cookware Handle Fatigue Resistance Test Apparatus
|
BS EN 12983-1 Cookware Handle Bending Strength Test Apparatus Product information: It is used to perform fatigue resistance test on cookware handles. The handle assembly should withstand 15,000 cycles of operation, and the handle or connecting parts will......
Sinuo Testing Equipment Co. , Limited
|
345MPa I Beam Cold Bending Machine Tunnel Construction Equipment
|
Tunnel Construction Using I-Steel Cold Bending Forming Mill Machine aluminum Used Cold Bending Forming Mill Machine Tunnel Construction Using I-steel Cold Bending Forming Mill Machine: Tunnel constrction using I-steel cold bending forming machine (it......
Henan Tytion Machinery Co., Ltd.
|
manual IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths And Insulation
|
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or ......
Guangzhou HongCe Equipment Co., Ltd.
|
Wire Core Circular Insulation Cable Testing Equipment Cold Bend Test Machine
|
IEC60540 Wire Core Circular Insulation Cable Testing Equipment Cold Bending Test Machine Product information: This test conforms to the standard requirements of IEC540. It is used for cold bend test of the circular insulation wire core whose diameter is ......
KingPo Technology Development Limited
|
60-120° Test Range Zipper Tape Folding Fatigue Resistance Testing Machine with AC 220V Power Supply
|
... state of zipper tape, repeatedly bending it at a certain speed and angle to test the quality of the zipper tape. Product Features 1. Color touch screen display and control, with both Chinese and ......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus
|
... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
|
Cold Bend Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94. It is applied to the ......
Pego Electronics (Yi Chun) Company Limited
|