IEC60669 Clause 12.3.12 Figure 10 Voltage Drop Tester For Plugs And Socket
|
...IEC60669-1: 2017 clause 12.3.12 and figure 10, IEC60884-1: clause 12.3.12 and figure 12 and etc. It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains clamped, even when it has been deflected during...
Sinuo Testing Equipment Co. , Limited
|
Figure 12 Screwless Terminals Deflection Tester / Voltage Drop Tester IEC 60884-1 Clause 12.3.12
|
...figure 12 Screwless Terminals Deflection Tester + Voltage Drop Tester Products Introduction/ This device complies with IEC 60884-1 clause 12.3.12 and figure 12, it is used to use to check whether the screwless terminals connected rigid solid conductor remains clamped, even when it has been deflected during normal installation. Deflecting the conductor and measuring the voltage drop......
KingPo Technology Development Limited
|
IEC60065 Figure 11 Plug Socket Tester , Socket Outlet Torque Tester 0.25 Nm
|
IEC60065 figure 11 - Plug Socket Tester - Socket Outlet Torque Tester 0.25 Nm Product information: The torque tester conforms to the standard of IEC 60335-1 Clause 22.3, IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs......
Guangzhou HongCe Equipment Co., Ltd.
|
ISO 8092 Automotive Wire Connector Voltage Drop Tester High Quality Vehicle Wiring Connector
|
...Voltage Drop Tester High Quality Vehicle Wiring Connector Voltage Drop Test Equipment Product Description Introduction The automotive wire connector voltage drop tester is suitable for measuring the voltage drop of non-reconnectable plug pins and connection plug lead-out wires and similar wiring interfaces, thereby judging the quality of the wiring interface. It can also be used as a contact voltage drop tester...
DONGGUAN LONROY EQUIPMENT CO LTD
|
RSQY-C CT PT Testing Equipment Secondary Voltage Drop Tester Instrument
|
RSQY-C CT PT Testing Equipment Secondary Voltage Drop Tester & Instrument Product Description Our secondary voltage drop tester can realize three-phase three-wire, three-phase four-wire and single-phase full-automatic measurement; it applies engineering ......
Wuhan Rising Electric Co., Ltd.
|
Multi-functional Voltage Drop Tester Used To Measure The Voltage Drop Test
|
Overview: Using high-end industrial automation measurement and control technology, the accuracy and rigor of product testing can be ensured by the upper and lower limit setting functions and time settings during testing, and it has the function of counting......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
KDT2000 Drop Tester For Heavy Packaging Drop Testing Meet ISTA Requirements
|
KDT2000 Drop Tester For Heavy Packaging Drop Testing Meet ISTA Requirements Product Introduction The KDT2000 Drop Tester is designed to simulate the drops and mechanical hazards that occur in distribution. It is especially suited to very large, heavy ......
Labtone Test Equipment Co., Ltd
|
20 / 50 Drops Laboratory Fire Testing Equipment Low Voltage Tracking Tester
|
20 Drops or 50 Drops Laboratory Fire Testing Equipment, Low Voltage Tracking Tester Description: ASTM D3638-92 low voltage tracking tester simulates wet/moisture condition, test tracking index(CTI) and anti tracking index(PTI). It is used for electrical ......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Voltage Drop Fire Testing Equipment Plug Wire Cable For UL817 VDE 0620 IEC884
|
Plug Wire and Cable Voltage Drop Tester for UL817 , VDE 0620 , IEC884 Overview: The instrument is suitable for measuring the voltage drop of the similar connection ports, such as non-reconnectable plug pins and connecting plug outlets, so as to judge the ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Drop Tester 1500mm Impact Testing Machine
|
... bottom plate) 5. Arm size (mm): 160 × 180 × 8 6. Control box size: 350 × 300 × 800mm 7. Drop error: ＜ 2 ° 8. Drop height error (mm): ± 10 9. Overall dimension of test bench (mm): about 1700 × 1200 × 2300 10. Weight (kg): about 550 11....
shanghai kerang technology co ltd
|