Home > Electrical Equipment & Supplies > Low Voltage Products > Surge Protection Device >

Figure Sb16 1 Pull Test Device

1-10 Results for

figure sb16 1 pull test device

from 5 Products

178mm / 254mm UL 962A Figure SB16.1 Abrupt Pull Test Device For Plug

...Figure SB16.1 Abrupt Pull Test Apparatus for testing plug Specifications: This apparatus is mainly used to perform the abrupt pull test of plug. This apparatus is designed and manufactured in accordance with UL 962A Figure SB16.1 / UL817 standard. Features: Model:KP-U62A6 Test station: 3 stations Abrupt pull weight:1.1kg* 3 Test times:0-9999 can be set Abrupt pull......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC 60320-1 Figure 9 Lateral Pull Tester Of Connectors And Appliance Input Sockets

....3, 23.6.2, 23.6.3, figure 9 and table 12 and table 13. Designed for lateral pull testing of connectors and appliance input sockets with ratings greater than 0.2A. Testing Principle The connector is inserted into the compatible appliance input socket that...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

UL2594 Cable Tension And Torque Test Device For Vehicle Plug And Socket

...Test Device for Vehicle Plug and Socket Complied Standards & Clauses Conforms to UL2594 clause 55.4, IEC62196-1:2014 clause 25.3 and figure 17 and table 11, IEC60309-1:2012 clause 23.3, etc. Product Overview It is used to test the ability of charging vehicle plug and socket, and connection cable accessories to withstand specified pulling force and torque. The pulling......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

0-100N IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

...Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector. Technical Parameters: 1, Flexible cable bending height: 40±2 mm, adjustable. 2, Pull range: 0-100N. 3, Pull......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Switch And Plug-Socket Endurance Tester SLT-2

...pull switches and knobs switches. It can also be used for load test when connected with the load box. This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and the normal...

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Submit your “figure sb16 1 pull test device” inquiry in a minute :

*From:	Your email address is incorrect!
To:	shanghai kerang technology co ltd Products: Switch And Plug-Socket Endurance Tester SLT-2
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “figure sb16 1 pull test device” inquiry

*From:
Your email address is incorrect!
To: KingPo Technology Development Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0