Flammability Glow Wire Test Equipment Glow Wire Tester IEC 60695
|
...-2-12, IEC60695-2-13, it is required by IEC 60598 Clause 13.3.2., UL746A, etc. Equipment Overview The SN772 Glow Wire Test Apparatus is a specialized testing instrument designed to simulate thermal stress caused by glowing components or ignition sources,...
Sinuo Testing Equipment Co. , Limited
|
7 Inch Touch Screen Flammability Tester PLC Glow Wire Test Equipment IEC60695
|
...Flammability Tester PLC Glow Wire Test Equipment IEC60695 Product details: HongTong has upgraded the glow wire tester to be PLC control version, the new PLC touch screen glow wire test equipment is more humanized and intelligent. The operation is much easier, and the apprance is more exquisite. The test......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695 Flammability Glow Wire Test Apparatus 0.5m3 Studio Volume
|
...Using electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or hold burning time, also test light-off...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC60695 Glow Wire Test Equipment PLC Control With 7 Inch Touch Screen
|
...Glow Wire Test Equipment PLC Control With 7 Inch Touch Screen IEC60695 Glow Wire Test Equipment With PLC Control 7 Inch Touch Screen Flammability Tester PLC Glow Wire Test Equipment IEC60695 Product details: KingPo has upgraded the glow wire tester to be PLC control version, the new PLC touch screen glow wire test equipment is more humanized and intelligent. The operation is much easier, and the apprance is more exquisite. The test...
Dongguan Kingpo Technology Limited
|
0.8N - 1.2N Glow Wire Test Equipment For Plastic Parts / Non-Metallic Insulation Parts
|
... or ignite their nearby parts, glow-wire test Simulation of hot components or overload resistance of the heat source or ignition source in a short time caused by heat Stress, the use of simulation technology to assess the risk of fire. Glow wire test for...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
IEC60695 Electronic Glow Wire Test Equipment/ Plastic Testing Machine
|
...Glow Wire Test Equipment/ Plastic Testing Machine Basic introduction: 1. glow wire test apparatus Accord with IEC60695-2-10, UL 746A, GB/T5169.10, GB4706.1 2. glow wire test apparatus Using electricity heating regulation material (Ni80 / Cr20) of resistanse wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min,then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or holde burning time ,also test...
Dongguan Liyi Environmental Technology Co., Ltd.
|
Digital Electronic Testing Equipment Glow Wire Test Equipment / Apparatus
|
...Testing Equipment Glow Wire Test Equipment / Apparatus Application a.The Glow Wire Tester is designed to carry out fire hazard testing on electro technical products in accordance with the provisions of International standards. b.The control unit is supplied with all the controls and metering necessary to accurately set the temperature of the glow wire. The wire......
SKYLINE INSTRUMENTS CO.,LTD
|
UL746A Glow Wire Test Equipment , IEC335 Multipurpose Cable Spark Tester
|
... equipment which are not fixed live parts but which provide insulation against electric shock and for the insulation of fixed safety extra-low voltage parts. Imitation products due to fault ......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Button Operation Glow Wire Test Equipment UL746A 7 Inch Color Touch Screen
|
Glow Wire Tester GW-1 Parameters: ParametersModel GW-1 GW-2(Touch screen) Working voltage 220V/50Hz 220V/50Hz Control operation mode Electrical control, button operation PLC control, 7 inch color touch screen operation, with infrared remote control Glowing......
shanghai kerang technology co ltd
|
Wire Bending Glow Wire Test Equipment Thermal Penetration Depth 7mm ± 0.5mm
|
...Wire Bending Glow Wire Test Equipment Glow wire testing machine JD-3052 product description: The glow wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550°C to 960°C) for 1 minute, and then burns at a specified pressure (1.0N). The hot test......
Dongguan jie dong test equipment co.,LTD
|
Submit your “flammability glow wire test equipment” inquiry in a minute :