100w 6.35*6.35mm Flange Mount Terminations DC 6GHz
|
...BeO, AlN,Al2O3 (Resistance Tolerance):±5%(default);±2%;±1% (Power Rating):5～1000W (Frequency):DC～18GHz (Temperature Range):-55～+150℃ (Temperature Coefficient):≤150ppm/℃ (RoHS Compliant) (We can provide the customized product according to the...
Shenzhen Yulongtong Electron Co., Ltd.
|
High Power Terminals 50 Ohm RF Chip Resistor Flange RIG 800W Flange Mount Terminations
|
High Power Terminals 50 Ohm RF Chip Resistor Flange RIG 800W Flange Mount Terminations Product Description General Specifications Standard Resistance:50Ω Substrate Material:AlN Resistance Tolerance:±5 % Power Rating:800W Frequency:DC–1GHz VSWR:≤ 1.25......
Kronz (guangzhou) Electronics Co., Ltd.
|
Rig High Power Flange Mount Terminations 800w 100ohm 50ohm Rf Resistor
|
Rig High Power Flange Mount Terminations 800w 100ohm 50ohm Rf Resistor Description The RIG22 Series by BOCHEN is a high-performance, flameproof power resistor engineered for demanding power applications. Designed with a durable ceramic core and a flame-......
Sichuan Bochen Guosheng Intelligent Technology Co., Ltd.
|
Cu 20W SMA 50 Ohm Terminator Black Anodizeing DC 6GHz
|
...DC-6GHz N type Coaxial Termination 20W DC-6GHz N Type connector Coaxial Termination, DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, flange are avaliable. Contact us with your requirement. Electrical Specifications Frequency Range DC – 6GHz......
Chengdu Zysen Technology Co., Ltd.
|
RF Connector QN Female Bulkhead Flange Mount
|
RF Connector QN Female Bulkhead Flange Mount Product Details RF Connector QN Female Bulkhead Flange Mount Teruilai P/N:QN-KYFD1 RoHS Certificate: Compliant Electrical data Requirments Frequency range DC-6GHZ Characteristic impedance 50Ω Dieletric ......
Terui International Group Co.,Ltd.
|
DC-6GHZ 1W N Male Connector Coaxial RF Dummy Load With 50ohm
|
DC-6GHZ 1W N Male Connector Coaxial RF Dummy Load With 50ohm 1W RF Dummy Load (N, DC-6GHz) are used in a wide variety of measurement systems; any port of a multi-port microwave device that is not involved in the measurement should be terminated in its characteristic impedance in order to ensure an accurate measurement. Terminations......
SHENZHEN ZD TECH CO., LTD
|
DC-6GHz 2W Dummy Load / Termination Load Wide Frequency
|
DC-6GHz 2W Dummy Load /Termination Load Good VSWR Wide band Frequency DC-6000MHz Better heating shrink VN-LD-6G-2W-OPm-R.pdf Part Number VN-LD-6G-2W-OPm-R Operating Frequency ( MHz ) DC-6000 Impedance ( Ohm ) 50 VSWR ≤1.25 Application Indoor Operating ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
Male Two Hole Flange Mount Coaxial RF Connector SMA BMA Series
|
...Flange Mount BMA Series Coxial RF Connector Product name RF cable Color Gold Plated Length 1500mm Connector male SMB Material all copper Use Microwave equipment and digital communication system Cable type RG316 Product Name SMA Male to BNC Female RG316 Cable Pigtail RF Coaxial Connector Cable Connector SMA Male to BNC Male Impedance 50 ohm Frequency DC to 6GHz......
Dongguan sun Communication Technology Co., Ltd.
|
Flange Mount Female Pluggable Terminal Block 300V 8A PA66 Brass Terminal Connectors
|
Flange Mount Female Pluggable Terminal Block 300V 8A PA66 Brass Terminal Connector □Right angle wire inlet; ■Vertical wire inlet; □45 degree wire inlet ■Single Level; □Double Levels; □Triple Levels Parameter and Drawing Specifications: UL Technical Data......
SCED ELECTRONICS CO., LTD.
|
DC Power Distribution Unit 19'' Rack-mount Terminal Box DCPD-10 for RRU BBU
|
... supply and equipment, is a distribution unit and surge protection equipment, providing multipath power output. - It is suitable to indoor low-voltage DC power distribution system for protection of equipment from surge and transient over...
KOCENT OPTEC LIMITED
|