CuNi44 Flat Copper Nickel Alloy Wire 0.2*3mm For Resistor
|
... at temperatures up to 600℃. CuNi44 offers high electrical resistivity and very low temperature coefficient of resistance (TCR). Due to its low TCR, it finds use in wire-wound precision resistors that...
Shanghai Tankii Alloy Material Co.,Ltd
|
C7541 Copper Based Alloys 1.5mm Copper Nickel Alloy Wire
|
...rod / wire Cu-Ni-Zn alloy Excellent corrosion resistance good mechanical strength Parameter for Nickel Silver Strips/Copper Nickel Zinc Wires: Alloy No. Chemical Composition Cu Mn Ni Zn C7521 62.0-66 0-0.5 16.5-19.5 Remainder C7541 60.0-64 0-0.5 ......
Ohmalloy Material Co.,Ltd
|
CuNi4/NC007/C72150/2.0842 Copper Nickel Alloy Wire With Good Mechanical Properties In Heat Exchangers
|
...Copper-Nickel Alloy Wire With Good Mechanical Properties In Heat Exchangers CuNi4 NC007 C72150 2.0842 Copper-Nickel Alloy Wire is a copper-nickel alloy with 4% nickel content and the balance being copper. This alloy combines the excellent electrical and thermal conductivity of copper with the increased corrosion resistance and strength provided by the addition of nickel. The alloy......
Jiangyin Chengxin Alloy Material Co., Ltd ，
|
Best Selling Copper Nickel Alloy Wire Cuni6 Cuni Wires Heat Resistance Alloy Cuni6 Copper Wire
|
... and low temperature coefficient of resistance. This means that the wire has a flat resistance/temperature curve over a wider range than other similar alloys such as "manganins". Additionally, the wire also has better corrosion resistance than other...
Changzhou Victory Technology Co., Ltd
|
High Density Copper Nickel Alloy Wire For Superior Electrical Conductivity
|
...Nickel Alloy wire has a modulus of elasticity of 213 KN/mm² to 227 / 240 KN/mm², which makes it perfect for high-stress applications. It is an alloy that is commonly used for its excellent resistance to high-temperature corrosion and oxidation. This product is ideal for use in environments where the temperature can reach up to 1000°C. One of the most significant advantages of the High Temperature Nickel...
Changzhou DLX Alloy Co., Ltd.
|
Corrosion Resistant Copper Nickel Alloy Wire CuNi23 for Marine Applications
|
Product Description: One of the key attributes of our CuNi Alloy is its low temperature coefficient of resistance (Tcr) of 50 X10-6/℃. This means that the alloy's resistance changes very little over a wide range of temperatures, making it ideal for use in ......
Huona (Shanghai) New Material Co., Ltd.
|
Smooth Surface Copper Nickel Alloy Wire Corrosion Resistance Salt Spray Test ≥72h
|
Product Description: One of the most important features of this product is its plating thickness, which ranges from 3-15μm. This ensures that the product is able to withstand even the toughest conditions and provides excellent protection against corrosion......
Yixing Dingfan New Energy Technology Co., Ltd
|
Corrosion Resistant Flux Cored Arc Welding Wire Copper Nickel Alloy Wire 950MPa For SEATWATER
|
Product Description: Features: Product Name: Titanium Welding Wire Supply State: Annealed Using: SEATWATER Application: Aerospace Chemical Industry Medical Equipment Corrosion Resistance: Excellent Supply Form: In Coil On Spool In Straight Lengths Other ......
Baoji City Changsheng Titanium Co.,Ltd
|
Copper Nickel Alloy Manganin QZ6J12 QZ6J13 QZ6J8 Soldering Nickel Plated Copper Wire
|
Copper Nickel Alloy Manganin QZ6J12 QZ6J13 QZ6J8 Wire Copper Nickel Wire Copper Nickel Wire Synonyms Cupro Nickel wire, Cupronickel wire, Nickel-Copper wire, 80-20 copper nickel wire, 90-10 copper nickel, 70-30 Copper-Nickel wire, Resistance Alloy wire, Constantan wire, Hecnum wire, CuNi44, Telconstan wire, Eureka, Advance, Ferry, Copper, compd. with nickel (1:1), Cu:Ni 55:45, Cuprothal, Manganina, Copper nickel 6, Alloy 60 About Copper Nickel...
TOBO INDUSTRIAL (SHANGHAI) CO., LTD
|
C70600 C71500 C12200 Copper Nickel Pipe Seamless 6"Sch40 Cuni 9010 Copper Nickel Alloy Pipe
|
...Copper Nickel Pipe Seamless 6"Sch40 Cuni 9010 Copper Nickel Alloy Pipe Product Name Copper Nickel Pipe Production Standard ASTM, JIS, DIN, GB, ISO Outer Diameter 2mm-260mm or as the customer’s request Wall Thickness 0.2mm-130mm or as the customer’s request Thickness 50mm -12000mm Hardness O, 1/4 Hard, 1/2Hard, 3/4 Hard, H, EH, OEM service Perforated, Cutting special size, Doing flatness......
TOBO STEEL GROUP CHINA
|
Submit your “flat copper nickel alloy wire” inquiry in a minute :