4j29 Kovar Nickel Based Alloy Strip Cold Rolled Full Annealed
|
4j29 Kovar alloy Strip Cold Rolled Kovar Strip Full Annealed (Common Name: Kovar, Nilo K, KV-1, Dilver Po, Vacon 12) It is also known as Kovar alloy.Kovar Strip was invented to meet the need for a reliable glass-to-metal seal, which is required in ......
JINXING MATECH CO LTD
|
Bright Annealing Alloy 400 Strip 0.1mm - 0.5mm Monel400 Strip Foil Width 5 - 500mm
|
...Annealing Alloy 400 Strip 0.1mm - 0.5mm Monel400 Strip Foil Width 5 - 500mm Material Nickel Alloy 800H,825,600,625,690,718 Hastelloy Alloy C276,C22 ,C2000, B2, B3, G30,Monel 400 K500 Standard AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc Technique Hot rolled / Cold rolled Thickness 0.1mm-3.0mm or as required Width 5 - 1000mm as required Type Precisiion Strip......
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
|
0.01-0.8mm Nickel Chromium NiCr 8020 Annealed Soft Strip Resistohm 80 For Resistor
|
...Annealed Soft Strip Resistohm 80 0.01-0.8mm for Resistor Application Product: Nichrome Strip/Nichrome Tape/Nichrome Sheet/Nichrome Plate Grade: Ni80Cr20/Resistohm 80/Chromel A Chemical Composition: Nickel 80%, Chrome 20% Resistivity: 1.09 ohm mm2/m Condition: Bright, Annealed, Soft Surface: BA, 2B, polished Dimension: Width 1~470mm, Thickness 0.005mm~7mm Nickel chrome Ni80Cr20 Electrical resistivity of alloy......
Shanghai Tankii Alloy Material Co.,Ltd
|
Inconel Alloy Strip Nicr 70/30 Annealed Nickle Chrome Alloy From China Manufacturer
|
... is a nickel-chromium alloy (NiCr alloy) characterized by High resistivity, good oxidation resistance,very good form stability,good ductility and excellent weldability. It is suitable for use at ......
Ohmalloy Material Co.,Ltd
|
Precision Annealed Hard Tempered Nickel Alloy Strip For Battery Component
|
...alloy precision strips coil Annealed , Hard Tempered BA , 2B surface For battery component Nickel and Nickel alloy precision strips coil Annealed , Hard Tempered BA , 2B surface For battery component overview Nickel Alloys are named for the significant amount of nickel used as it’s the unifying or principal ingredient. Nickel alloys......
Wuxi Zhongxin Special Steel Co.,Ltd
|
Tungsten Steel Hard Metal Alloys Strip with high wear resistance
|
...alloy strip hard metal high hardness customization Carbon steel can get higher hardness and better wear resistance after heat treatment.The hardness of carbon steel in annealed state is verv moderate, and it also has good machinability. Carbon steel raw materials are very common, easy to get, and the production cost is relatively low. Product name tungsten steel strip......
Luoyang Forged Tungsten-Molybdenum Material Co., Ltd.
|
High Strength NO4400 Nickel Alloy Strip 5800mm Monel 400 Cold Rolled
|
... and tend to be more obvious, and the strength of the alloy steel annealing state than carbon steel has a lot of advantages, and in normalizing, than obviously increase the carbon steel and the strength of the alloy steel after quenching and tempering, the...
Tisco Group Steel Co., Ltd
|
Huona 0.19*25mm 6J13 Manganin Alloy Strip Ultra-Stable Resistivity
|
... New Material, is a thin-gauge functional strip crafted from Mn-Cu-Ni ternary manganin alloy. Through advanced vacuum smelting, multi-pass precision cold-rolling, and segmented annealing processes, this strip achieves ultra-tight dimensional control (0...
Huona (Shanghai) New Material Co., Ltd.
|
Ultra width ultra thin Rolled Copper Strip T2,C1100 Annealed Copper Strip
|
Ultra width ultra thin Rolled Copper Strip T2,C1100 Annealed Copper Strip Ultra width ultra thin Rolled Copper C1100 Specification Grade Specification Thickness(mm) Width (mm) Length(mm) Condition T2 min.0.1 300~1400 C Soft,hard ,Annealed/Soft C1100 CU-ETP......
JIMA Copper
|
Inconel 718 N07718 2.4668 Nickel Alloy Strip Cold Rolled
|
... – separated from the coil – are available in lengths from 250 - 4,000 mm (9.84-157.48 in). Introduce Inconel 718 is an age-hardenable Alloy-chromium alloy that combines corrosion resistance with high strength and good fabricability. It...
Hunan Fushun Metal Co., Ltd.
|
