UL746A ZY6055 Wire Testing Equipment Hot Wire Tester Machine IEC 60695
|
... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby....
Dongguan HOOHA Electrical Equipment Company Limited
|
0.5 M3 UL746A IEC 60695 Hot Wire Tester Machine
|
... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby....
Dongguan HOOHA Electrical Machinery Company Limited
|
Touch Screen 14mm/S Electrical Hot Wire Tester
|
...Hot wire tester Scope of application The heating wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) 1 min, then sets the pressure (0.95±0.1 N)30 s of vertical burning samples. To determine the ignition......
Beijing Jinshengxin Testing Machine Co., Ltd.
|
Aluminum Fixture IEC60950 Hot Wire Tester For Ignition Point
|
Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing ......
Gester International Co., Ltd
|
High-precision Flammability Testing Equipment For Hot Wire Tester Complies With International Standard IEC 60695-2-12 Luminescent Filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr)
|
...hot wire tester complies with the international standard IEC 60695-2-12 Luminescent filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr) Standard of Glow Wire Tester: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Household Appliance Materials Hot Wire Ignition Independent Exhaust Tester With Electrical Control
|
...requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors....
Guangzhou HongCe Equipment Co., Ltd.
|
Height 60mm Hot Wire Ignition Tester 250mm Anneal Holder Distance
|
... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The...
Dongguan Kingpo Technology Limited
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot Wire Ignition Tester 5.28Ω/M
|
...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Standard GB5169 Glow Wire Test Apparatus , Hot Wire Ignition Test Flammability Temperature Test
|
... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Lab Testing Equipment Fire Hazard Evaluation / Hot Wire Ignition Test Machine Ni80/Cr20 IEC60695-2-20
|
Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition...
Hai Da Labtester
|
Submit your “gester ignition hot wire tester” inquiry in a minute :