Cemented Carbide Rod For End Milling Tools
|
...end milling tools Our rods have different grade and right to use on different application; Specially we are produce the Nano Grain carbide (Grain＜0.2µm); Our rods are with high hardness and wear/corrosion resistance, all products with stable quality; 100% raw material; Hip sintered, high hardness, high wear resistance; l Dimension: diameter from 2-42mm, length 310/330mm; l Use for Finish milling l Grind with h6......
Hunan Boyun-Dongfang Powder Metallurgy Co., Ltd
|
ISO14001 2004 Tungsten Carbide Rods for End Mills , solid carbide tools
|
...suitable for manufacturing punching dies and tools. YU06 14.7 3000 2050 It is suitable for manufacturing milling cutters for machining PCB. It is also suitable for manufacturing various kinds of solid cemented carbide tools for machining glass fiber, wood,...
Zhuzhou Mingri Cemented Carbide Co., Ltd.
|
Solid Carbide Cutter Square End Mill Tools for Roughing To Finishing 12mm 14mm End Mill
|
...Carbide Cutter Square End Mill Tools for Roughing To Finishing 12mm 14mm End Mill Description Grain size carbon tungsten, high toughness, special use for high speed , high wear-resistance. We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills......
Dongguan Diamond Hardware Factory
|
Durable ISO K10 1.7um Cemented Carbide Rods For End Mills
|
...Carbide Rods Tungsten Solid Carbide Tube For End Mills Make Cemented carbide is a hard material used in machining tough materials such as carbon steel or stainless, as well as in situations where other tools would wear away, such as high-quantity production runs. Most of the time, carbide will leave a better finish on the part, and allow faster machining.Carbide tools......
ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.
|
High Hardness Customized YG6C/YG8C/YG11C Tungsten Carbide Rods For End Mills
|
... size YG6C/YG8C/YG11C Tungsten Carbide Rods for end mills Grades: Grade Density T.R.S Hardness Properties & Applications g/cm3 N/mm2 HRA VKD800 14.46 4500 94.6 Nano grain size, suitable for making tools for hardened steels with a hardness of HRC 55......
Zhuzhou Weikeduo Cemented Carbide Co., Ltd.
|
Length in 330 mm Unground Tungsten Carbide Rods For End Mill, Tunring, Reamers
|
... of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer. 1. Grade: ISO K10-K40 2. Diameter: 3 mm-26 mm 3. Length: 330 mm 4. Surface: Unground or H₆ Ground Carbide Rod With One Straight Hole Unit: mm Other custom-sized rods could be...
JWE CARBIDE CO., LTD.
|
YG6 YG8 Tungsten Carbide Rod H6 Tolerance For End Mill Tool Impact Resistance
|
...Carbide Rod with h6 Tolerancce for End Mill Applications: Solid carbide rods used for making the end-mills / reamer .automobile special cutters, printed circuit board special cutters, engine special cutters, Horologe processing special cutters, integral vertical milling cutter, graver and etc. Besides, they can bu used for making of cemented carbide stamping head, Core bar and perforatioin tools......
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD.
|
Ground H6 Tungsten Carbide Rod HRA 91.9 Cemented Carbide Milling Blanks
|
... Density: 14.45 Grain size: Fine grain size Regular Carbide grades: ISO-Range Co (%) WC incl. Doping (%) Density (g/cm3) HV 30 (N/mm2) HRA T.R.S KIc* (Shetty) (MNm-3/2) ......
Zhuzhou TGC Cemented Carbide Co.,Ltd.
|
Titanium Carbide Ball Nose End Mill HRC65 10mm Shank Diameter 2 Flutes
|
...Carbide Ball Nose End Mill for Die Steel RLD End Mill Catalog in English.pdf Our company only cooperates with big reliable carbide rod suppliers. Only sells the carbide tools produced by ourselves. So don't need to worry about the stability of quality. This is high hardness ball nose end mill, Especailly good for the hardened mold steel above HRC58. We also can produce customized size end mills......
Changzhou Ruilida Tools Co., Ltd.
|
Long Carbide Nose Ball End Mill With Black AlTIN Coating , H6 Tolerance
|
Quick Detail: 0.6-0.8um Mirco grain size solid carbide rod TIALN Coating ,high Aluminium (Black),Middle Aluminium(Purple) Made by 5 AXIS CNC grinder Checked by Zoller Inspection Equipment Workpiece upto HRC50 1 piece packing. Standard Type Description: ......
INMIND TOOLS CO.LTD
|
Submit your “h6 toleance carbide rods for end mills tools” inquiry in a minute :