Bright Surface Heat Treatment KCF Raw Material For KCF Pin And Sleeves
|
... insulating layer with thickness about 8-15um appeared on its surface. This alloy materials is widely used in resistance welding industry, it can be made into insulated location pins(guide pins) and Location bushings(guide sleeves) for nut welding or...
BLOOM(suzhou) Materials Co.,Ltd
|
Nitriding Ejector Pins And Sleeves / Mold Sleeve Bushing For Plastic Molding
|
...Pins And Sleeves / Mold Sleeve Bushing For Plastic Molding An ejector sleeve is like an ejector pin or rod, which pushes the finished plastic mould piece out of the core or cavity of the Mould Base. Inside and Outside Diameters are ground concentric to ensure proper alignment. Senlan Indroduction plastic mould parts.pdf Product Detail Material 1.2344 Hardness 46-52HRC Heat treatment......
Senlan Precision Parts Co.,Ltd.
|
DIN 1530A B Black Mould Ejector Pins And Sleeves DIN 1530 AH DIN 1530 A
|
PRODUCT DESCRIPTION Product Name DIN1530AH/ DIN1530A/ DIN1530A-B Black Straight head ejector pin Product Specification DIN1530AH WS 1.2210 HRC58-62 DIN 1530A WAS 1.2344 Surface hardness>=HV 950 Core HRC 40-45 DIN 1530A-B WAS 1.2344 Surface hardness >=HV ......
Dongguan Datong Mold Fittings Co.
|
SKH51 Customized Ejector Pins And Sleeves Non Standard Full Internal And External Hardness
|
...h the thimble is called the bobbin needle assembly, which is one of the plastic mold parts.Dimensional Drawing The material of ejector sleeves is FDAC, and the material of ejector pins is H13, with hardness of 48~52HRC, vacuum heat treatment, nitriding and...
Shenzhen GEPE Technology Co., Ltd
|
Precision SKD61 Core Pins And Sleeves for Progressive Die Ejector
|
...Pins And Sleeves Used In Progressive Die Ejector Ejector Pin and Sleeves Introduction 1. Standard: Non standard. 2. Material: SKD11 or SKD61 3. Diameter size : above 0.6mm, it depends on your drawing design. 4. Length size : 100mm-900mm, it depends on your drawing design. 5. Hardness: Material Inner hardness Surface Hardness Heat Treatment......
Dongguan Kingrui Precision Mould Co.,LTD
|
300kg/H Rotary Type Steel Ball Mesh Belt Heat Treatment Aluminium Melting Rotary Furnace
|
... parts (like bearing inside and outside sleeve, steel balls, roller, pin roller, etc) with diameter less than30mm. Take Chrome Steel Ball as example: Work parts: Chrome steel ball Wholesale heat treatment furnace process: bright quenching, tempering;...
Wuxi Wondery Industry Equipment Co., Ltd
|
Custom Ejector Pins And Sleeves Non Standard H13 For Plastic Mold
|
... Size Depend on your drawings or products standard Place of origin Dongguan, Guangdong, China Heat treatment Available Surface Work TiCN, TiN, Aitain, Ticrn, nitriding , Black oxygened, Black coating etc Tolerance + - 0.002mm Polishness ......
DongGuan BG Precision Mold Parts CO., Ltd
|
1.2083 S136 Ejector Pins And Sleeves , HPM38 Precision Mould Parts
|
1.2083 HPM38 S136 Precision Mould Parts For China Packaging Industry Company Profile PPT.pdf Product Detail Material SKD61 Hardness 50-58HRC Heat treatment Available Service Made-to-order Surface treatment TiCN, TiN, TiALM, Ticrn, nitriding , Black ......
Dongguan Huixiang Mould Technology Co., Ltd
|
Heat Treatment Stepped Ejector Pins SKD61 Hot Die Steel Molding Pins
|
Temperature Resistant Standard Size Steped Ejector Pins SKD61 Hot Die Steel Materials for Plastic Injection Mold Description Mold Ejector Pins is commonly plastic mold parts, used to separate products from the mold. The die thimble produced by cemented ......
Shenzhen Bede Mold Co., Ltd
|
Heat Treatment Aluminium Die Casting Mould Core Dievar HRC 46 - 48 1.2312 P20
|
Aluminium Die-casting Mould CORE Dievar HRC 46-48 MOULD HOLDER 1.2312 P20 Product Description Aluminium Die-casting Mould Components: Cavity Inserts, Cores,Core Pins, Sprue Parts,Nozzle,Ejector Pins,Plunger Shot Sleeve, Holder Block; Aluminium Die-casting ......
Ningbo Beilun Jiawei Machinery Co., Ltd.
|
Submit your “heat treatment kcf pin and sleeves” inquiry in a minute :