High Temp Resist PTFE Ring Gasket With Density 2.15 Used To Band PTFE On Pistons
|
high temp resist PTFE ring gasket with density 2.15 used to band PTFE on pistons Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate elongation(min) % 150 Working Temp. ℃ -180~260 Melting point ℃ 327 Produce Max Temp......
Ningbo XiaYi Electromechanical Technology Co.,Ltd.
|
High Temp Resist PTFE Ring Gasket With Density 2.15 Used To Band PTFE On Pistons
|
high temp resist PTFE ring gasket with density 2.15 used to band PTFE on pistons Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate elongation(min) % 150 Working Temp. ℃ -180~260 Melting point ℃ 327 Produce Max Temp......
Ningbo WeiWo Electromechanical Tech Co.,Ltd.
|
1.5Mm High Temp Resistance Polyester Mesh Belt For Mining Non revealed sludge
|
1.5 Mm High Temperature Resistance Polyester Square Hole Mesh Belt Special For Mining Polyester Square Hole Mesh Belt Product Introduction Polyester square hole mesh belt mainly used in paper-making factory network for paper machine to produce the OARS ......
Hebei Reking Wire Mesh Co.,Ltd
|
High Temp Resistant Agricultural V Belts For Pulsation Loads Polyester / Kevlar Cords
|
Wrapped Agricultural Belts (SA, SB, SC, LA, LB, LC) Polyester, Aramid, Kevlar Cord Agriculture Belt (SA, SB, SC, LA, LB, LC) is especially recommended for shock loads, pulsation loads, large centre distances, vertical shaft drives, and it is especially ......
Shanghai Sanchen Mechanical Electronics Co., Ltd.
|
SGS Double Layer PTFE Seamless Belt Easy Deviation Low Intensity
|
PTFE fusing machine belt 1.seamless belt: It is made of the cylindrical high-strength glass fiber or Kevlar (aramid) fabric which is woven by knitting round loom,and is coated with PTFE emulsion. The seamless belt completely overcomes the problems of jointed belts such as bad running stability and off-tracking,etc. The service life of PTFE seamless fusing machine belt is three times longer than any other kind of fusing machine belt......
Taizhou SPEK Import and Export Co. Ltd
|
Fluoroplastic PTFE Insulated Wires 16 Awg high temperature Wire High Temp Resistant
|
... components etc. Features: 1. High temperature resistance 2. Cold resistance 3. Good softness 4. Aging resistance 5. Anti-interference 6. Easy insulation stripping 7. Small diameter 8. Especially suitable for frequent bending occasions Properties of...
Xiangtan Shenzhou Special Cable Co., Ltd
|
High Temp Felt Fabric Conveyor Belt Endless Polyester Belt For Aluminum Cooling Beds
|
High Temp Felt Fabric Conveyor Belt Endless Polyester Belt For Aluminum Cooling Beds SEAMLESS FELT BELTS In the aluminum alloy molding process, the earlywood, graphite has been replaced by heat-resistant felt. If you use a special high-temperature resin to harden, hardened after the carpet life than the original nearly doubled. Our main product: felt roller, felt belt, felt strip, set of the blanket, synchronous belt......
HUATAO LOVER LTD
|
300mm Weather Resistance Ptfe Conveyor Belt For Paper Industry
|
...Resistance Teflen Coated Open Mesh Conveyor Belts Used for Paper industry Description of the teflen conveyor belt: PTFE conveyor belt used between low temperature -70C and high temperature 260C, it has weather resistance and anti-aging. After practical application, if placed for 200 days at a high temperature of 250C, not only the strength will not decrease, but the weight will not decrease; placed at a high......
Hebei Reking Wire Mesh CO.,Ltd
|
High Temperature Resistance PTFE Coated Fiberglass Mesh Conveyor Belt Food Grade
|
High Temperature Resistance PTFE Coated Fiberglass Mesh Conveyor Belt Food Grade Product Introduction PTFE coated fiberglass mesh is made of a special woven fiberglass substrate coated with polytetrafluoroethylene (PTFE) evenly on the surface. Our non-stick fiberglass mesh has higher strength, higher wear resistance......
Unionfull (Insulation) Group Ltd.
|
Food Grade High Temperature Resistant PTFE Mesh Conveyor Belt 4*4mm Openning
|
Food Grade High Temperature Resistant 4*4mm Openning Mesh Belt 1. Specification: a,Material: fiberglass b,Mesh size:0.5-10mm c,Width:300-4200mm d,Temperature Resistance:-140-360℃ Model Mesh Size Material Weight Tem Resistance Max Width Tensile Strength ......
Anping County Comesh Filter Co.,Ltd
|
Submit your “high temp resistant ptfe seamless belt” inquiry in a minute :