Home Appliance AC Motor Testing Equipment Winding Resistance High Precision
|
Stator Testing Machine For Compressor Motor Stator/Refrigerator/Air Conditioner Compressor Motor 1. Product: Stator testing machine 2. Tested product: compressor motor stator 3. Stator testing machine introduction This testing machine can be used to test......
Qingdao AIP Intelligent Instrument Co., Ltd
|
Home Appliance Cord Anchorage Pull Force And Torque Testing Equipment
|
... 25.15; IEC 60884-1 Plugs and socket-outlets for household and similar purposes – Part 1: General requirements clause 23.2; Application of Cord Anchorage Torque Testing Equipment: Appliances provided with a supply cord, and...
Guangzhou HongCe Equipment Co., Ltd.
|
Flexible Cable Power Cord Anchorage Torque Test Equipment Conforms To IEC60884-1/ VDE0620
|
... to IEC60884-1 clause 23.2 (table 18) and VDE0620 clause23.2(table18). It’s used to test the power cords and flexible cables of household appliance and similar appliance. The torque test shall be carried out after the completion of retention test....
Pego Electronics (Yi Chun) Company Limited
|
IEC60335-1 Power Cord Torque Testing Machine
|
... which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and other household electrical appliances, medical equipment, checking whether the clamping device is secure. Appliances provided with a supply cord,...
Dongguan Kingpo Technology Limited
|
Household Appliance Power Cord Anchorage Test Equipment Manually Operation
|
...Appliance Power Cord Anchorage Test Equipment Manually Operation Standard: IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements clause 25.15. Application: It is used to test the household appliances supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall have a cord anchorage. The cord......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60598-1 Internal Power Cord Bending Test Equipment For Power Cord Of Household Appliances
|
...Cord Bending Test Equipment For Power Cord Of Household Appliances Product Information For Internal Power Cord Bending Test Equipment: This flexibility test equipment matches the requirements of clause 23 of IEC 60335-1. It is used to conduct flexing resistance test on the electrical connections and internal wires of different parts of the appliance......
Sinuo Testing Equipment Co. , Limited
|
OEM Power Cord Flexibility Test Equipment With Calibration Certificate
|
IEC60335-1 Electrical Appliance Tester Power Cord Flexibility Tester Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. ......
KingPo Technology Development Limited
|
Lamps Light Testing Equipment , Screwed Gland Torque Test Equipment IEC 60884 1
|
Screwed Gland Testing Machine HC9925 Standard: IEC 60598-1 clause 4.12.5, IEC 60884-1 2013 clause 24.6 Application: This device is use for test the torque resistance strength of screwed gland of lamps and similar appliances. Test sample: Screwed gland of ......
shanghai kerang technology co ltd
|
Cord Bend Test Equipment / Tensile testing machine 10 - 40 mumbers/min Speed
|
... cable forward to the center of the turnplate. Pull the cable vertically with load at rated bending speed, angle and times then to begin the bending test. When the tester stops automatically, check the jacket damage and the breakage rate of conductors....
Infinity Machine International Inc.
|
Cable Anchorage Pull Force and Torque Test Apparatus for Charging Station
|
... 110, Figure 111 and Table 114. Product overview Samples and restrictions: Electric vehicle AC and DC charging station Test purpose: The flexible cord anchorage of the appliance shall relieve conductors at the terminals from pulling force and torque. This...
Sinuo Testing Equipment Co. , Limited
|