K10 Tungsten Carbide Rods HRA91.5 Hardness Carbide Alloy Rod For Wood Cutting Tools
|
...Tungsten carbide rods HRA91.5 high hardness carbide alloy rod for wood cutting tools Usage: carbide rods used for making the drill bits/ end-mills / reamers .automobile special cutters, printed circuit board special cutters, engine special cutters, Horologe processing special cutters, integral vertical milling cutter, graver and etc. Besides, they can be used for making of cemented carbide......
Zhuzhou Weikeduo Cemented Carbide Co., Ltd.
|
Yl10.2 Tungsten Carbide Rod , Cemented Carbide Tips For Drills And Endmills
|
...: wearing parts Hardness: HRA91 Strength: > 690Mpa Advantage: high ware-resistance. Applications of YL10.2 Tungsten carbide tips drill rods for drills and endmills solid tungsten carbide rods are used for cutting aluminum alloy, cast iron, stainless steel,...
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
|
HRA91.5 Tungsten Carbide Bar Stock With Blanks Coated Polished Surface Available
|
... blank Chemical Composition: WC :88.5% + Co: 10% + Others: 1.5% Density: 14.2~14.6 g/cm3 Hardness: HRA91.5. T.R.S.: 3200N/mm2 Recommended Grade: YG6, YG8, YG6X, YG012, YG013, YG8A etc. Surface: stock in blank, center less blank and ......
Zhuzhou Zonco Sinotech Wear-resistant Material Co., Ltd.
|
Rod With Hole Tungsten Carbide Rod Tungsten Carbide Blank Ra3.2 for end milling cutter coolant hole
|
... carbide round bars, with an outstanding product line of coolant and solid carbide rod. Size D* L mm tolerance D (Blank,mm) D(Grinding,mm) L(mm) φ(1-5)* 330mm , +0.30/+0.45 h6/h7 0/+0.5 φ(6-20)* 330mm , +0.......
Zigong Jingruida Cemented Carbide Co., Ltd.
|
Wearproof Ground Tungsten Carbide Rod ISO9001 Impact Toughness
|
.... 2. Manufacture and process PCB micro-drill. 3. Make hard alloy mandrel and other wear-resistant parts. 100% Virgin Materials Polishing Tungsten Cemented Carbide Rod/Bar 1. 100% virgin raw materials. 2. Various kinds of grades are availalbe based on...
Chengdu Lian Xiang New Material CO.,LTD.
|
Copper Or Nickel Tungsten Carbide Rod Cemented Carbide Composite Welding Rods
|
... scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to...
Zhuzhou Mingri Cemented Carbide Co., Ltd.
|
YL10.2 10% Cobalt Tungsten Carbide Rods With Coolant Oil Hole Duct
|
...Tungsten Carbide Rods with Coolant Oil Hole Duct Series-Our Tungsten Carbide Rod includes the below series: : NO. Series 1 Solid Unground Tungsten Carbide Rod Blanks 2 Cemented Carbide Rods with One Straight Coolant Hole 3 Tungten Carbide Rods with Two Straight Coolant Holes 4 Solid Carbide Rods with Two 15° 30° or 45° 65° Helical Holes 5 Cut-to-Length(CTL) Tungsten Carbide Rod......
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD.
|
100% Virgin Material Tungsten Carbide Rod For Making Carbide PCB Drills
|
...Advanced production equipment/test equipment (With HIP sintering). 3. With production experience over 10 years. We can make extruded tungsten carbide rod or die pressing tungsten carbide tube. 4. Standard length 100mm and 330mm, dia. from 0.5mm to 60mm,...
Zhuzhou Gold Sword Cemented Carbide Co., Ltd.
|
Diameter 4mm Tungsten Carbide Rod
|
... of high hardness, high strength, chemical stability, low expansion coefficient, electric and heat-conducting, the sintered tungsten carbide rod is widely applied in the industrial manufacturing area. Tungsten carbide rods which can be available from...
JWE CARBIDE CO., LTD.
|
YG6 YG8 YG10 Tungsten Carbide Rods 3-30mm Dia 330mm Length
|
...Length 10-330 mm Solid Carbide Round Blank Bar Solid Tungsten Carbide Rod Tungsten carbide raw material 10% cobalt tungsten alloy carbide rod stock D8x60mm We manufactured and stocked a large range of tungsten carbide rod with or without hole for you. Our ......
Chengdu Kedel Technology Co.,Ltd
|