Home > Home Appliance > Small Kitchen Appliances > Electric Kettles >

Iec 60335 2 15 Comprehensive Life Test Equipment

1-10 Results for

iec 60335 2 15 comprehensive life test equipment

from 8 Products

IEC60335-2-15 Clause 19.101 Cordless Kettle Comprehensive Life Test Equipment

... according to the standard requirement of IEC60335-2-15 clause 19.101, 19.102 and 22.103, and etc. It is used to test the comprehensive life test, verification and reliability and durability of the whole machine of the cordless kettle for household and...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 60335-2-15:22.106 Electrical Safety Tester For Kettle Plug / Pull Out

IEC 60335-2-15:22.106 Electric Kettle Plug And Pull Out Life Test Machine Function overview: This equipment shall test the structure of the electric kettle coupling according to clause IEC 60335-2-15:22.106 and clauses 19 and 22 of GB4706.19-1999.According to the standard requirements, the pot should be placed on the base at 10 frequency per minute, and pulled out 10,000 times to detect the reliability of the structure. Special, point: The test...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC 60335-2-15 Conventional Cordless Kettle Boil Pour Dry Heating Withdraw Fully Functions Tester

... types of conventional cordless electrothermal kettle , complete simulation of artificial water boiling mode. It is designed and manufactured according to IEC 60335-2-15 clause 19.101, 19.102, 22.106 and etc. The whole without staff care, failure alarm....

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

60335 IEC Test Equipment

60335 IEC Test Equipment IEC60335 Kettle Insert Withdraw Endurance Test Device for Cordless Kettle Plug Kettle Insert-withdraw Endurance Test Device Product information: The kettle insert-withdraw endurance test device is designed and manufactured according to the standard IEC60335 -2- 15 which is used to test the cordless kettle plug life. Test principle and product feature: Test......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC 60335 - 2 Power Cord Bending Tester With Electric Driving And PLC Control

IEC 60335 - 2 Power Cord Bending Tester With Electric Driving and PLC Control Overview: The equipment is according to GB4706.15,IEC 60335-2-23:11.101 A specially designed and manufactured device for hair care fitted with a rotating connection Test the bending resistance of the appliance's power cord. Test principle: The appliance equipped......

Dongguan Zhongli Instrument Technology Co., Ltd.

Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China

Home Appliances Cordless Kettle Endurance Test Equipment Voltage Output 0-250V

...Safety – Part 2-15: Particular requirements for appliances for heating liquids’ clause 22.103. Application of Home Appliances Test Equipment: The appliance coupler of cordless appliances shall be constructed to withstand the stresses occurring during...

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Stable Appliance Test Equipment Strain Twisting Cord Anchorage Testing Machine

Cord Anchorage Strain and Twisting Test Equipment Standard: Clause 25.15 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements and etc. Application: It is used to check the cord anchorage of the appliances ......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

IEC61032 Test Probe 13 Short Test Pin

...IEC CSA & UL requirements Test Probe 13 of Short Test Pin - Fig. 9 of EN 61032 This Test Probe Pins (Figure 9 - Test probe 13 of IEC 61032) is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536). Conforms to: Standard IEC 61032, IEC 60065, IEC 60335-1, IEC 60950, IEC 60601, IEC 60745 and UL etc. Technical Parameter: Test probe diameter:3 mm Test probe length:15...

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Submit your “iec 60335 2 15 comprehensive life test equipment” inquiry in a minute :

*From:	Your email address is incorrect!
To:	HK LEE HING INDUSTRY CO., LIMITED Products: IEC61032 Test Probe 13 Short Test Pin
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 60335 2 15 comprehensive life test equipment” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0