Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance
|
IEC 60529 Jointed test finger 12mm, IP2X Material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 bot......
KingPo Technology Development Limited
|
IEC 60529 Jointed Test Finger Probe Stainless Steel With 50N Force
|
Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
EN 60529 IEC 60529 IP1X Test Finger Probe Sphere Diameter 50mm
|
EN 60529 IEC 60529 IP1X Test Finger Probe Sphere Diameter 50mm IEC60529 IP1X 50mm Sphere Test Probe This IEC 60529 IP1X 50mm Sphere Test Probe is also in accordance with IEC 61032 Figure 1. It is intended to verify the basic protectiion against access to ......
Dongguan Kingpo Technology Limited
|
IEC 61032 Figure 2 / IEC 60529 Standard Test Finger Shell Anti Electric Shock With Thrust 10N 20N 30N
|
... provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test. The standard test finger is intended to verify the basic protection against access to hazardous parts. It is...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60529 Standard Test Finger Probe B with 10 ~ 30N Force
|
IEC 60529 Standard Test Finger Probe B with 10 ~ 30N Force Force Level: 10N, 20N, 30N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Knurled Finger Diameter: 12mm Knurled Finger Length: 80mm Application: 1. The joint part of The Standard Test......
HK LEE HING INDUSTRY CO., LIMITED
|
iec 60529 IP2X code jointed test finger probe , access test probe, safety test
|
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
Standard Test Probe B With 50N Force For IEC61032 Figure 2 And IEC 60529 IP2X
|
... 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force gauge for precise testing applications. Technical parameters: Parameters /Model SN2210-2T Name Standard test probe with force Joint 1 30±0.2 (mm)...
Sinuo Testing Equipment Co. , Limited
|
IPX7 Ingress Protection Test System IEC 60529 IPX7 Test Chamber
|
...IEC60598-1. Equipment Overview It is used for the testing of IPX7. Mainly used to test the product waterproof performance in the soaking environment. Through the test, check whether the product waterproof level meet the requirements, for product design, R...
Sinuo Testing Equipment Co. , Limited
|
IEC 60529 IPX9k Test Equipment SS304 Stainless Steel Material
|
...high pressure and temperature water jetting at degree IPX9 (IPX9K).. ●High pressure test ●high temperature test Technical Specification Model R9K-1200 Name IEC 60529 IPX9k Equipment Internal dimensions (mm) 1000*1200*1000 D*W*H Overall dimensions (mm)...
Xi'An LIB Environmental Simulation Industry
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test......
DONGGUAN LONROY EQUIPMENT CO LTD
|
