Ground Recessed Luminaires Light Testing Equipment IEC 60598-2-13
|
...Light Testing Equipment IEC 60598-2-13 Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test. This equipment......
Guangzhou HongCe Equipment Co., Ltd.
|
100N Impact LED Light Testing Equipment IEC 60598 1 Clause 8.15.1
|
... to the standard requirements of IEC 60598-1 clause 8.15.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test. The parts of the handlamp which are gripped in...
Dongguan Kingpo Technology Limited
|
Arrangement For Impact Test Light Testing Equipment
|
... 60598-1 clause 8.15 Product information: This test apparatus is designed and manufactured according to the standard requirements of IEC 60598-1 clause 8.15.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene,...
Guangzhou Shice Equipment Co., Ltd.
|
High Accuracy Light Testing Equipment IEC 60598 1 Lamp Caps Test Sample
|
Test Gauges for Lamp Caps and Holders HDJ0001 Standard: IEC 60598-1: Luminaires - Part 1:General requirements and tests; IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Application: These gauges are for the control of interchangeability and safety of lamp caps and holders. Test......
shanghai kerang technology co ltd
|
IEC60598-1- Figure29 Light Testing Equipment Parts Luminaries Test Chain
|
... and made of 63 % Cu/37 % Zn. The chain shall have a resistance value of 2,5 Ω/m ± 20 % when stretched with a load of 200 g/m. NOTE The resistance value of the test chain should be checked before each measurement. Sample Certificate ( ISO17025 )...
KingPo Technology Development Limited
|
IEC 60598 IP3X Test Probe Test Rod High Precision Inspection Probe IEC 60529 Potable Testing Probe
|
... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,...
DONGGUAN LONROY EQUIPMENT CO LTD
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test...
Sinuo Testing Equipment Co. , Limited
|
IEC 60669-1 Test Equipment Self Ballasted Lamp Bulb Load Box Three Test Stations
|
... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment
|
IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment Complied Standards & Clauses This IPX1~8 waterproof test system conforms to IEC 60529:2013, etc. Equipment Overview This test device is to verify Protection against Vertically Falling ......
Sinuo Testing Equipment Co. , Limited
|
Fire Resistance Test Furnace IEC 60331 , Impact Test Equipment For Wire / Cable
|
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|