IEC 60811 Resistance Of Insulations And Sheaths To Cracking Test Apparatus
|
IEC 60811 Resistance Of Insulations And Sheaths To Cracking Test Apparatus Standards & Clauses: This test apparatus complies with the standards IEC 60811-509:2012, IEC 60811-508:2012, which specifies test methods for the polymer insulation and sheathing materials of electrical distribution cables and communication cables, including marine cables. It is suitable for the cracking and winding test......
Sinuo Testing Equipment Co. , Limited
|
3000W Mineral Oil Immersion Test Apparatus Six Groups Working Stations
|
... made of rubber and plastic. Test method: The test piece is immersed in hot oil for a period of time and then the test piece is taken out to test the tensile strength. Technical Parameters Quartz tube: ф38mm, depth 250mm; Oil tank size: 350 × 350 ×...
Guangzhou HongCe Equipment Co., Ltd.
|
Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus
|
... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60811-504 2012 Mandrel Test Apparatus & Impact Test Apparatus
|
... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 60811-401 Natural Ventilation Aging Test Chamber for cable and plastic
|
... like IEC 60811-401-2014 and GB/T 2951-2008. Designed for testing the thermal aging performance of cable insulation, rubber, plastics, and electrical components, this chamber ensures reliable, energy-efficient operation with ......
Chongqing gold mechnical and electrical equipment Co., Ltd
|
High Temperature Pressure Testing Machine for Cable and Wires by IEC 60811-508
|
...1997 Sect 8.1~8.3 ● IEC 60811-508 gives the procedure for a pressure test at high temperature, which typically applies to thermoplastic compounds used for insulating and sheathing materials Technical specifications 1 Thickness of knife edge two ......
Advanced Instruments Co.,Limited
|
ISO 6964 IEC 60811 ASTM D1603 Compliant Carbon Black Content Tester for Polypropylene Plastics with High Automation Level
|
...IEC 60811 Carbon Black Content Tester ASTM D1603 Polypropylene Plastics Carbon Black Content Testing Machine Product Description Scope of Application The carbon black content tester is suitable for determining the carbon black content in polyethylene, polypropylene, and polybutylene plastics. The carbon black test......
DONGGUAN LONROY EQUIPMENT CO LTD
|
IEC 60811 Flame Detector Tester White Hydrothermal Single Point Controller
|
.... Meet the standard: 1. Conforming to GB/T2951.14, IEC 60811 standard. Main parameters: 1.temperature range: 1 to 40 ℃ to 150 ℃ 2. Temperature fluctuation: 0.5﹪ 3, temperature uniformity: ≦ 2 ℃ 4, temperature deviation: plus or minus 1.5 ℃ 5....
Dongguan HOOHA Electrical Equipment Company Limited
|
EV Charging Connector Withdrawal Force Test Apparatus IEC 62196-1
|
... This EV Charging Gun Withdrawal Force Test Apparatus is designed in compliance with IEC 62196-1:2022 clause 16.16. It accurately measures the maximum force required to insert the charging gun into the socket, ensuring the ......
Sinuo Testing Equipment Co. , Limited
|
Kingpo Splash Test Apparatus Iec 60335-2-49 Figure 101 Long Using Life
|
Kingpo Splash Test Apparatus Iec 60335-2-49 Figure 101 Long Using Life Splash test apparatus IEC 60335-2-49 figure 101 The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes up 150 mm abo......
KingPo Technology Development Limited
|