BS 6853 IEC 61034 3m3 Smoke Density Apparatus
|
... is placed horizontally underthedefinite firecondition. The equipment comprises a cubic enclosure and a photometric system. The specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned. IEC 61034 - 1...
SKYLINE INSTRUMENTS CO.,LTD
|
3 Cubic Meter Room Cable Smoke Density Tester IEC 61034 Standard Micro Controlled
|
...smoke density generated by wires, cables and optical cables under specific burning conditions. It is divided into IEC 61034-1 (test equipment specifications) and IEC 61034-2 (test procedures and requirements). The standard quantifies the smoke density by...
Chongqing gold mechnical and electrical equipment Co., Ltd
|
1.5 - 3.5kg/M Aerial Bundled Cable IEC 61034-2 Smoke Density Of Cable Diameter Minimum Bending Radius
|
Product Description: Aerial Bundled Cable (ABC), also known as ABC Aluminum Aerial Bundled Cable, is a kind of 0.6/1kV /Triplex or Quadruplex Service Aluminum ABC Cable which is used for power distribution and transmission. It is primarily composed of ......
Shanghai Shenghua Cable (Group) Co., Ltd.
|
Horizontal Burning Smoke Density Tester L3000 * W3000 * H3000 Mm IEC 61034 GB/T 17651
|
IEC 61034 GB/T 17651 Cable and Wire Horizontal Burning Smoke Density Tester Application: Cable Burning Smoke Density Tester, to determine the smoke density of cables burning under defined conditions. This smoke density tester is used for horizontal burning of a cable or fiber optic cable, the smoke that is released from the flame combustion or no flame combustion condition, the light transmission rate of smoke......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
BS 6853 IEC 61034 Smoke Density Tester Part 1 Three Cube Meter 3m3 Cable
|
...IEC 61034 Smoke Density Tester Part 1 Three Cube Meter 3m3 Cable Introduction: 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to measure the smoke generation from the value of light source penetration through the smoke...
Dongguan HOOHA Electrical Equipment Company Limited
|
IEC 61034 BS6853 27 Cube Meter Cable Smoke Density Tester
|
... condition. The equipment comprises a cubic enclosure and a photo-metric system(the outer test chamber is not supplied by us, customers should build the room by themselves.) The specified standard fire source (ethanol 90±1%,...
Delta Technology (Chongqing) Co., Ltd.
|
3M Cube Smoke Density Apparatus Chamber Meets IEC 61034 Standard
|
...significant position. It is a specialized piece of equipment designed to accurately measure the smoke density generated during the combustion or pyrolysis of various materials, providing crucial data for evaluating fire hazards and ensuring compliance with...
Dongguan Precision Test Equipment Co., Ltd.
|
Cable Flame Test of Wire Smoke Density Tester For Horizontal Burning Test Instrument
|
Cable Flame Test of Wire Smoke Density Tester For Horizontal Burning Test Instrument Model:5707 1.)Standard:IEC 61034,BS 6853,GB/T17651.1~2 2.)Container size(mm):3000*3000*3000 3.)Inner container material:SUS304 stainless steel 4.)Inner filler:calcium ......
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
ISO 5659 Flammability Tester Computer Control Plastic Combustion Smoke Density Tester
|
...Smoke Density Tester Flammability Tester Computer Control 1. Instrument use The plastic combustion smoke density tester is a new type of test equipment for measuring smoke density developed according to the technical conditions specified in the national standard GB/8323.2-2008. This standard is applicable to the determination of the optical density generated by the combustion of plastics, and the maximum optical density......
DONGGUAN LONROY EQUIPMENT CO LTD
|
DX-8368 Plastic Smoke Density Tester
|
...Smoke Density Tester Plastic combustion smoke density tester is a new type of testing equipment for measuring smoke density developed according to the technical conditions specified in the standard GB/8323.2-2008 and ISO5659-2 "Plastic Smoke Generation Part 2 Test Method for Determining Smoke Density by Single Chamber Method", these standards are suitable for determining the specific optical density of smoke......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “iec 61034 standard smoke density tester” inquiry in a minute :