Home > Machinery > Woodworking Machinery > Finger Jointer >

Iec 62196 Ev Test Probe

1-10 Results for

iec 62196 ev test probe

from 64 Products

IEC 62196 Jointed Test Finger EV Connector Testing Equipment

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 62196 EV Charging Accessories Type 2 Female Shutter Socket With E-Lock

IEC 62196 Type 2 Female Socket EV Charging Accessories With E-Lock Female Shutter Socket Product Description IEC 62196 EV connector Mennekes Type 2 is a charging socket (wallbox) for 32Amp rated. The EV socket have pioneered the design of charging cables and components, setting standards that have now been adopted by the rest of the EV industry. It has an unique Shutter IEC 62196 Type 2 Female Socket 1/3Phase 16A/32A EV......

Chengdu Sixpence Technology Co.,Ltd.

Address: Room 3210,No.138, Tianfu 2nd Street,Chengdu, Sichuan,China

IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm

IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm 1. Introduction of apparatus for checking damage to VE conductors: The apparatus for checking damage to EV conductors is designed to meet the test requirements of IEC62196-1 clause 13.3 figure 12, IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1 clause 12.2.5 and figure 9, IEC62052-31 clause 6.9.7.3 (for flexion test......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC 62196 EV Charger Cable Type 2 3 Phase EV Charging Cable

IEC 62196 Type 2 Cable EV Charger Cable Type 2 3 Phase EV Charging Cable Highlights: Copper alloy with silver plated for better conductivity. Thermo plastic: insulator inflammability UL94V-0. Every product is 100% tested before leaving the factory to ensure product quality. Our Type 2 charger works with all IEC62196 standard EVs. Specification: General Brand: HEIU Type: EV......

Chengdu Heiu Technology Co., Ltd.

Address: Floor 21,NO.2 Gaopan Road,Wuhou District,Chengdu,Sichuan

16A 480V 3 phase electric car chargers IEC 62196 ev charging cable type 2

16A 480V 3 phase IEC 62196 ev charging cable type 2 Product Features -Standard Connector, can be identified by EV (with Type 2 inlet) correctly and charge effectively. -Rugged design. Its structural strength is sufficient enough to support the rolling of ......

Chengdu Honors Technology Co.,Ltd

Address: No.1,Floor 3,No. 366,North Section of Hupan Road,Chengdu

Test Probe Similar To Test Probe B Of IEC 61032 With Circular Stop Face Ø50 Mm , IEC 60335-1 Test Probe B

... 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1....

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Standard Test finger probe,test probe B iec 61032 EN60335,testing probe

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....

ALLIED TESTING (HK) CO.,LTD.

Address: Unit 04,7/F,Bright Way Tower,No,33 Mong Kok Road Kowloon,HK.

IEC Standard Articulated Test Probe with 10N Thrust, IEC 61032

...standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Jointed Test Finger was made on stainless steel and Polyamide handle. Material: Stainless Steel. Handle: Polyamide....

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

IEC 60598 IP3X Test Probe Test Rod High Precision Inspection Probe IEC 60529 Potable Testing Probe

... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,...

DONGGUAN LONROY EQUIPMENT CO LTD

Address: A31, 11 Floor, No 1 Building, Minjian Jinrong Building, No 111 Guantai Road, Sanyuanli Community, Nancheng Street, Dongguan, Guangdong, China

Submit your “iec 62196 ev test probe” inquiry in a minute :

*From:	Your email address is incorrect!
To:	DONGGUAN LONROY EQUIPMENT CO LTD Products: IEC 60598 IP3X Test Probe Test Rod High Precision Inspection Probe IEC 60529 Potable Testing Probe
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 62196 ev test probe” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0