IEC 62196 EV Connector Testing Equipment Breaking Capacity Test Equipment
|
... 62196-3 Ed.4CDV 2020 clause 22 and 23. IEC 60309-1: 2012 clause 20 and clause 21. Equipment Overview This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and...
Sinuo Testing Equipment Co. , Limited
|
IEC 60598-1 Single Station Insertion Strain Force Strain Relief Test Device
|
...-1 clause 22.3 and figure 11, IEC60065 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2 etc. Application for Strain Relief Test Apparatus: The device is used for checking the torque applied to the output socket after the device inserted into...
Sinuo Testing Equipment Co. , Limited
|
IEC 62133 Mechanical Shock Test Equipment Shock Tester For Battery Pack Test
|
..., loading and unloading as well as during the use of the products. All of these are transient excitation on the object, causing the object to produce mechanical characteristics of high speed, acceleration, strain rate, etc instantly. These...
Labtone Test Equipment Co., Ltd
|
IEC 62196-1 PLC Electric Vehicle IP5X And IP6X Sand Dust Testing Equipment
|
IEC 62196-1 PLC Electric Vehicle IP5X and IP6X Sand Dust Testing Equipment 1. Introduction: The sand dust testing equipment is applied to test the physical and other related properties of electronic and electrical products, electric vehicle, lamps, ......
Pego Electronics (Yi Chun) Company Limited
|
IEC62196-1 Electric Vehicle Test Equipment For Charging Plug And Socket Cable Flexing
|
...–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for...
KingPo Technology Development Limited
|
IEC 62196-1 Connection Set Conductive Charging For Electric Vehicles Test Machine
|
IEC 62196-1 Connection Set Of Conductive Charging For Electric Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, specifies the requirements for plugs, socket-outlets, connectors, inlets and cable assemblies as described in IEC......
Guangzhou HongCe Equipment Co., Ltd.
|
High Temperature Short Circuit Battery Testing Equipment For IEC 62133 UN38.3
|
...Testing Equipment for IEC 62133 UN38.3 Requirements: Short-circuiting of the positive and negative terminals of the cell at ambient temperature shall not cause fire or explosion. Test Standard: IEC 62133-2012, UN38.3, UL 2054, UL 1642, IEC 62281-2004, IEC 60086-4... Technical Parameter: Structure All-in-one structure, venting and pressure relief......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Stable Appliance Test Equipment Strain Twisting Cord Anchorage Testing Machine
|
... of the appliances provided with a supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall relieve conductors from strain, including twisting, at the terminals and...
shanghai kerang technology co ltd
|
IEC C5 to SR Power Cable with Strain Relief for Custom Wiring
|
... for Laptops & Medical Equipment Product Description Technical Specifications Parameter Description Product Name IEC C5 to SR Tinned Bare Wire Power Cable Input Connector IEC 60320 C5 Plug (Cloverleaf, 3-Pin) Output End SR (Strain Relief) with Tinned Bare......
Shenzhen Kuncan Electronics Co., Ltd.
|
60 Times / Min Two Stations Plug Socket Test Equipment For Cord Retention
|
...Part 1: General requirements’ clause 23.2 and figure 20. Application of Apparatus for testing cord retention: Rewirable plugs and rewirable portable socket-outlets shall be provided with a cord anchorage such that the conductors are relieved from strain,...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|