Fig8 IEC60065 Test Finger Probe , Antenna Coax Plugs And Sockets
|
Test Plug For Mechanical Tests On Antenna Coaxial Sockets Product information: This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed on the device and equipped with parts or ......
Guangzhou Shice Equipment Co., Ltd.
|
IEC60065 Plug In Socket Tester Torque Test Apparatus Device With BS/UL/AS/NZS Plugs
|
IEC60065 Plug - In Torque Test Apparatus Equip with BS / UL / AS / NZS Plugs 1. Introduction The plug-in torque test apparatus is designed according to IEC60065 figure 11 and IEC60950-1 clause 4.3.6, it is applied to check various elements that are connected to sockets mechanical strength of direct plug-in equipment. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket...
Pego Electronics (Yi Chun) Company Limited
|
Mechanical Antenna Coax Sockets IEC 60065 Harden Steel Test Plug
|
....5 Figure 9. It is used to verify the antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ACCESSIBLE parts shall be constructed so as to withstand such mechanical stresses as may be...
Sinuo Testing Equipment Co. , Limited
|
IEC60065 Figure 11 Plug Socket Outlet Torque Test Device For UL / Australia Plug And All - Purpose Plug
|
... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets....
KingPo Technology Development Limited
|
Australia / UL Plug Socket Tester Socket Outlet Torque Testing Machine IEC60065 Figure 11
|
... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets....
Guangzhou HongCe Equipment Co., Ltd.
|
Torque Balance Plug Socket Tester SOB-1 IEC 60884 0-200mm Force Arm
|
...ch occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The...
shanghai kerang technology co ltd
|
Test Plug for Mechanical Tests on Antenna Coaxial Sockets
|
IEC60065 Coaxial Test Plug on Antenna Coaxial Socket Test plug for mechanical tests on antenna coaxial socket Conforms to IEC60065 Figure 9, Made entirely of stainless steel. All parts precision machined. Company introduction HK LEE HING INDUSTRY CO., ......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC60065 Figure 11 Reliability Testing Equipment , Waterproof Testing Machine
|
...-outlets shall not impose undue strain on these socket-outlets. Compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in figure 11. The balancing arm of the test apparatus pivots about a...
Dongguan Kingpo Technology Limited
|
0.5N 1N 1.25N 2.5N Plug Torque Test Device SUS304 Stainless Steel
|
...meets the requirements of IEC60598-1, Chapter 4.14.6, Figure 11 of GB8898-2011, Figure 11 of IEC60065, IEC60335, IEC60884 and other standards. It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the...
SKYLINE INSTRUMENTS CO.,LTD
|
5.5 X 2.1mm Dc Plug Socket Soldering For Dc Notebook Power Charger
|
5.5 X 2.1mm DC Plug Socket Soldering For DC Notebook Power Charger # DC Plug Socket Soldering Properties CCTV Camera Power Pigtails Plug DC 5.5x2.1mm Male Wire Lead Cord Coax Cable The DC right/angle plug diameter: 5.5 * 2.5 mm, 4.75 *1.7 mm, 4.8 * 1.7 mm......
DZ Iron Steel Group
|
