Stainless Steel Environmental Testing Equipment IEC60695-10-2 Ball Pressure Test Apparatus
|
... etc. the surface of the part to be tested is placed in the horizontal position and a steel ball of 5 mm diameter is pressed against the surface with a force of 20 N. The test is performed in a heating cabinet at a temperature of 75°C ± 2°C. The ball is...
Pego Electronics (Yi Chun) Company Limited
|
IEC60695-10-2:2014 Ball Pressure Tester / Stainless Steel / 2.4kg
|
IEC60695-10-2:2014 Ball Pressure Tester Overview: The device is a special instrument designed and manufactured according to the requirements of the relevant standard provisions of the ball pressure test, which is used to test the heat resistance of non-......
SKYLINE INSTRUMENTS CO.,LTD
|
Ball Pressure Tester Meet IEC60695-10-2 Loading Device HTE-006
|
Ball Pressure Tester Meet IEC60695-10-2 Loading Device HTE-006 It is used for testing the heat resistance of the electrical enclosure and external parts which are made up with the insulating materials. It is applicable to electrotechnical equipment and ......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Ball Pressure Tester , IEC 60695-10-2 Abnormal Heat – Ball Pressure Test Method
|
... This Ball Pressure Tester applicable to assessment of heat-resistant fro all insulation materials of electrical enclosure, external components and plastic. Trial is that the sample placed on the ......
KingPo Technology Development Limited
|
Ball Pressure Tester For Insulating Materials Heat Resistance
|
....1.10, IEC 60884-1 clause 25.2, 25.3, figure 37, IEC 60669-1 clause 21.3 and 21.4 figure 19, etc. It is used for ......
Sinuo Testing Equipment Co. , Limited
|
IEC 62196 Electric Vehicle Ball Pressure Test Apparatus
|
...Equipment Overview The ball pressure tester is designed and manufactured according to IEC60695-10-2 Edition 3 2014-2 fig 1. It is required by many standard requirements such as IEC 62196-1Ed.4CDV 2020 clause 29.3. It is parts of non-metallic ......
Sinuo Testing Equipment Co. , Limited
|
IEC60950-1/IEC60884-1/CEI60968/IEC60695-10-2:2003/EN IEC60335-1 Ball-pressure Apparatus
|
IEC60320-1 / IEC60598-1 / IEC60950-1 / IEC60884-1 / CEI60968 / IEC60695-10-2:2003 / EN IEC60335-1 Ball-pressure Apparatus 1. Introduction: Ball pressure tester is used for testing parts of non-metallic materials for resistance to heat. It is applicable to ......
HK LEE HING INDUSTRY CO., LIMITED
|
304 Stainless Steel IEC Test Equipment Of Ball Pressure Test With Thermocouple
|
304 Stainless Steel IEC Test Equipment Ball Pressure Tester 5mm Dia Product details: The Ball Pressure Tester is designed and manufactured according to IEC60695-10-2 Edition 3 2014-2 fig 1. It also conforms to many standard requirements such as IEC60884......
Guangzhou HongCe Equipment Co., Ltd.
|
500W Power Horizontal Flammability Tester 0.1MPa Gas Pressure IEC60695 11 10
|
Horizontal-vertical Flame Test Apparatus Standard:UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. Application:It simulates the influence of early-stage flame when there is a fire around the electric and electronic products......
shanghai kerang technology co ltd
|
Automatic Melt Flow Index Insurement Full Load 220V ± 10% 50HZ
|
...10% 50HZ Melt Flow Index Insurement With1 Year Warranty Introduction: Plastic ball indentation hardness tester is in refers to the regulation of the diameter of the steel ball, under the influence of load test, vertical pressure into the surface of the sample and keep a certain time on unit area of indentation on the average pressure tester. Developed by our company plastic ball indentation hardness tester......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|