IEC60884 1 Immersion Testing Equipment IPX7 Waterproof Pereformance
|
IEC60884 1 Immersion Testing Equipment IPX7 Waterproof Pereformance IEC60884-1 Immersion Testing Equipment IP Code of the IPX7 Immersion Test Chamber IEC60884-1 Test The Product Waterproof Pereformance Standard IEC60529 degree of protection provided by enclosures (IP Code) of the IPX7, IEC60884-1, IEC60335-1, IEC60598-1. Application It is used for the testing of IPX7. Mainly used to test......
Dongguan Kingpo Technology Limited
|
15° Horizontal Vision Ingress Protection Test Equipment , Immersion Testing Equipment IEC60884-1
|
...Immersion Test Chamber HC-IPX7A IP Code of the IPX7 Immersion Test Chamber IEC60884-1 Test The Product Waterproof Pereformance Standard IEC60529 degree of protection provided by enclosures (IP Code) of the IPX7, IEC60884-1, IEC60335-1, IEC60598-1. Application It is used for the testing of IPX7. Mainly used to test the product waterproof performance in the soaking environment (water depth 1 meters). Through the test......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60529 IPX7 Waterproof Immersion Test Equipment Soaking Immersion Test System
|
...-1, IEC60598-1. Equipment Overview This equipment is designed for IPX7 waterproof testing, specifically simulating immersion conditions to evaluate the water resistance of products. By performing the test, it verifies whether the waterproof level of the...
Sinuo Testing Equipment Co. , Limited
|
Switch Plug And Socket Life Tester Complies With IEC60884-1 IEC Test Equipment
|
..., is designed to meet IEC standards and provide high-precision and high-efficiency testing solutions. This equipment can not only simulate various extreme conditions in actual use, but also ensure the accuracy and reliability of the test results. It is...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Fig38 IEC60884-1 IEC Test Equipment , 20N Compression Test Apparatus
|
.... It is used to test the pressure-resistant properties of the electrical accessories and mounting box under the circumstance of being heated. This testing equipment should be put into use with the heating box. This device comprises two steel jaws, having a...
Guangzhou Shice Equipment Co., Ltd.
|
Oil Immersion Test Equipment IEC 62368-1 For The Oil Resistance Test Of Enameled Wires
|
... Y.4.5, etc. The tester is suitable for testing the oil resistance of rubber, plastic enameled wire or insulator. Test method: Immerse the specimen in hot oil, then remove the specimen and test its tensile strength. If the test piece is enameled wire,...
Sinuo Testing Equipment Co. , Limited
|
PLC Remote Control Battery Pack Sealed Water Immersion Testing Equipment
|
...Immersion Testing Equipment Product description: Sealed water immersion test machine seawater immersion tank is mainly used for simulating a single battery or battery module immersed in seawater components at room temperature for 2h (seawater as a simulated seawater composition, a concentration of 3.5% NaCl solution), the water depth sufficient to submerge the test......
Dongguan Gaoxin Testing Equipment Co., Ltd.,
|
IEC 60320 / IEC60884 Electrical Safety Test Equipment , Plug Withdrawal Force Tester
|
IEC 60320/IEC60884 Plug Withdrawal Force Tester Details this device meet the requirements of GB2099.1-2008 Fig 16, IEC 60320 and IEC 60884 clause 20 and 21 fig 16, use to test the plug withdraw force. What is the IEC 60320 Withdrawal Force Test? Interpower......
KingPo Technology Development Limited
|
industrial Water Immersion Test Equipment Waterproof Ipx7 Ipx8 Test Chamber
|
Immersion Cylinder Immersion Tank Waterproofipx7 Ipx8 Test Chamber, Water Immersion Test Equipment Immersion Cylinder Immersion Tank Waterproofipx7 Ipx8 Test Chamber is used to perform the tests for testing the degree of protection provided by a product enclosure. The level of protection against water ingress is represented by an IP code. All LIB test......
Xi'An LIB Environmental Simulation Industry
|
B-SST-120 Sedimentation Rate1-2ml/80c㎡.H Sea Water Immersion Test Equipment
|
... to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is,...
BOTO GROUP LTD
|
