IEC60950-1 Hot Wire Ignition Tester Annealing Time 8s-12s Power 0.26W/Mm±4%
|
IEC60950-1 Hot Wire Ignition Tester, Annealing Time 8s-12s, Power 0.26W/mm±4% M.1 Hot wire ignition test M.1.1 Five samples of each material shall be tested. The samples shall be 1 50 mm long by 1 3 mm wide, and of uniform thickness stated by the material manufacturer. Edges shall be free from burrs, fins, etc. M.1.2 A (250 ± 5) mm length of nichrome wire......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695-2-20 Hot Wire Ignition Tester Flammability Testing Equipment
|
...Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Height 60mm Hot Wire Ignition Tester 250mm Anneal Holder Distance
|
... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The...
Dongguan Kingpo Technology Limited
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot Wire Ignition Tester 5.28Ω/M
|
...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Automatic Flammability Testing Equipment , Hot Wire Ignition System Tester
|
... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology ......
shanghai kerang technology co ltd
|
IEC60695-2-20 Hot Wire Ignition Test Apparatus , Fire Hazard Testing Equipment
|
...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot...
Pego Electronics (Yi Chun) Company Limited
|
Lab Testing Equipment Fire Hazard Evaluation / Hot Wire Ignition Test Machine Ni80/Cr20 IEC60695-2-20
|
Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition...
Hai Da Labtester
|
Standard GB5169 Glow Wire Test Apparatus , Hot Wire Ignition Test Flammability Temperature Test
|
... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Hot Wire Ignition Independent Exhaust Flammability Test
|
... holder distance 250mm Specimen holder distance and height 70mm,height:60mm (the distance between the holder surface to the tray surface) Wire wrapping tension and its distance 5.4N±0.05N, 6.35mm±0....
Guangzhou Shice Equipment Co., Ltd.
|
Aluminum Fixture IEC60950 Hot Wire Tester For Ignition Point
|
Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing ......
Gester International Co., Ltd
|
Submit your “iec60950 1 hot wire ignition tester” inquiry in a minute :