IEC68 120mm Adhesion Tape Rolling Ball Tack Tester
|
...Ball Method Initial Tack Ball Test Instrument Product use: Using the inclined ball method, when the short contact between the steel ball and the adhesive surface of the test specimen occurs with a slight pressure, the adhesion of the adhesive tape, label and other products to the steel ball......
Guangdong Aisry Instrument Technology Co., Ltd.
|
Tilt Angle 22° Adhesion Tape Rolling Ball Tack Tester
|
... on adhesive tape by rolling distance to determine the merits of tape tack. Machine operation procedures : Clean up chute and grounder on the tester by GB/T 4852-2002 specified ways,and after that you cannot touch them anymore. Fix test piece on hard and...
Perfect International Instruments Co., Ltd
|
PSTC 6 Rolling Ball Tack Tester Tape Initial Adhesion Testing Machine
|
...Ball Tack Tester Tape Initial Adhesion Testing Machine 1. Test principle PSTC 6 Rolling Ball Tack Tester adopted the inclined plane rolling ball method and the inclined groove rolling ball method of method B: Method A: the adhesion of the adhesive tape to the steel ball when A short contact occurs between the steel ball......
DONGGUAN LONROY EQUIPMENT CO LTD
|
20º ~40° Adjustable Angle Tape Initial Adhesion Testing Equipment / Rolling Ball Tack Tester
|
.... Application It is applicable in tack tests of pressure sensitive adhesive tapes, adhesives, adhesive products.Turn the adhesive surface of specimen upward and place it onto the test plate (inclining 30°).Release freely the steel balls from large one to...
Dongguan Liyi Environmental Technology Co., Ltd.
|
20º ~40°Adjustable Angle Tape Peel Test Machine Rolling Ball Tack Tester with One Year Warranty
|
...h ASTM D 3121. It is applicable in tack tests of pressure sensitive adhesive tapes, adhesives, adhesive products.Turn the adhesive surface of specimen upward and place it onto the test plate (inclining 30°).Release freely the steel balls from large one to...
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Stainless Steel Ball Pressure Tester IEC60884-1 Clause 25.2 Figure 37
|
Stainless Steel Ball Pressure Tester IEC60884-1 Clause 25.2 Figure 37 Product details: The Ball Pressure Tester conforms to many standard requirements like IEC884-1, IEC950 and so on. It is used for testing the heat resistance of the electrical enclosure......
Guangzhou HongCe Equipment Co., Ltd.
|
BN-IV-50T Digital Ink Viscosity Tack Tester Automatic Inkometer
|
BN-IV-50T Digital display Ink viscosity meter (Automatic inkometer, ink tack tester) mainly adopts the highest configuration of modern intelligent industrial control: PLC+touch screen+servo motor, which can clearly and accurately display the instantaneous ......
Wuhan Bonnin Technology Ltd.
|
Ball Pressure Tester , IEC 60695-10-2 Abnormal Heat – Ball Pressure Test Method
|
... This Ball Pressure Tester applicable to assessment of heat-resistant fro all insulation materials of electrical enclosure, external components and plastic. Trial is that the sample placed on the ......
KingPo Technology Development Limited
|
Drop Ball Impact Tester Impact Lab Test Equipment With AC220V 65KG Tester
|
...Ball Impact Tester Impact Testing Machine with AC220V 65KG Tester Hot Sale 0-2M Drop Ball Impact Tester Impact Testing Machine with AC220V 65KG Tester Drop Ball Impact Tester is used to measure the impact resistance by the specified steel ball at specified height. It applies for ceramic, acrylic, glass, plastic and etc. Hot Sale 0-2M Drop Ball Impact Tester Impact Testing Machine with AC220V 65KG Tester......
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
50KV 100KV 150KV 200KV Discharge Protective Ball Gap Tester For High Voltage Measurement
|
Portable 50KV 100KV 150KV 200KV Discharge Protective Ball Gap Tester For High Voltage Measurement Product introduction ZXQ Series Discharge protection ball gap is a pair of spherical electrodes with the same diameter. When it forms a complete set of test ......
Wuhan GDZX Power Equipment Co., Ltd
|