150um Depth ISO Standard Block Test Specimen
|
...) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth:150µm Width target value:0...
HUATEC GROUP CORPORATION
|
Aluminum Block Kitchenware Tester With Heater And Thermostat Aluminum Block Test Specimens
|
...Block Kitchenware Tester with Heater and Thermostat Aluminum Block Test Specimens Introduction Estimated Packaging Dimensions: (W*D*H) 900*600*750mm Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed) Estimated Gross Weight: 80kg Specifications Suit for standard: CEN/TS 12983-2: 2005 Annex D & BS EN 12983 Annex M Diameter of the block......
Guangdong Haida Equipment Co., Ltd.
|
Standard Sensitivity Test Specimen Qqi Magnetic Particle Inspection Test Shim
|
Standard Sensitivity Test Specimen QQI Magnetic Particle Inspection Test Shim Magnetic particle flaw detector accessories: test specimen (QQI) CX230 0.002inch thickness, ASTM E1444/E1444M-11 CX430 0.004inch thickness, ASTM E1444/E1444M-11 ......
HUATEC GROUP CORPORATION
|
Standard Sensitivity Test Specimen QQI Magnetic Particle Inspection Test Shim
|
Standard Sensitivity Test Specimen QQI Magnetic Particle Inspection Test Shim Magnetic particle flaw detector accessories: test specimen (QQI) CX230 0.002inch thickness, ASTM E1444/E1444M-11 CX430 0.004inch thickness, ASTM E1444/E1444M-11 ......
Testech Group Co., Ltd
|
GB ISO Standard Sieve Testing Equipment Stainless Steel Lab Sieve Shaker
|
... sieve, test screen, lab screen, experimental sieve, standard sieve, inspection sieve, standard test sieve, sampling sieve, particle sieve, analysis sieve, checking sifter, soil sieve, sieve set, pharmacopeia screen, ......
Xinxiang AAREAL Machine Co.,Ltd
|
EN 344 ISO 17707 Vertical Whole Shoes Sole Flexing Testing Machine
|
...ISO 17707 Vertical Whole Shoes Sole Flexing Testing Machine Instrument Overview The sole test specimen is mounted on the EN flexing resistance tester, with its cut notch positioned directly above the center axis of the rotating shaft. The tester drives the specimen to undergo (90±2)° flexing (stretching) over the shaft. After a predetermined number of test cycles, the length of the cut notch on the specimen......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
ISO Standard Vibration Testing Shaker Table For Product Quality Assurance Shake Test
|
ISO Standard Vibration Testing Shaker Table For Product Quality Assurance Shake Test Description Rugged suspension system and linear motion guiding, strong carrying capacity, good guiding functions, high stability Load ......
Labtone Test Equipment Co., Ltd
|
ISO Standard Laboratory Testing Services , Independent Laboratory Advanced
|
Laboratory Testing LT According To Client Request Case By Case To Do Testing We provide a wide range of services for testing: Metals Composites and polymers Construction materials Soil Mechanical, electrical and electronic components and systems For most......
Top Inspection Limited
|
BS - 3144 Standard Leather Testing Equipment For Flexing Resistance Test with 12 Groups
|
...,IULTCS/IUP 20-1,ISO 17694,EN 13512 ,EN344-1 section 5.13.1.3 and annex C,EN ISO 20344 section 6.6.2.8,AS/NZS 2210.2 section 6.6.2.8,ASTM D 6182 Technical Specifications: Model GX-5025 Fixture 12 Groups Specimens test block 70×45mm Bending Angle 22.5°...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Penetrant Testing Specimen Precision Star Tam Panel Ndt
|
...) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth:100µm Width target value:0...
TMTeck Instrument Co., Ltd
|