IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers
|
IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers Product information: The test equipment conforms to the standard requirements of IEC60335-2-36 clause 18.101. The equipment is used to verify the equipment equipped with ......
Sinuo Testing Equipment Co. , Limited
|
PLC Control Furniture Testing Device For Drawer Mechanical Durability Testing
|
...Testing Device For Drawer Mechanical Durability Testing Application: Drawer Durability Tester is used to test the durability of the drawer slides of furniture. Apply a certain load inside the drawer, repeated pull-out and close of the drawer. After a certain number of cycles, check if the slide is still able to meet the requirements. Technical Parameter: Model TNJ-005 Maximum stroke 400mm Speed 0.25m/s Test......
Dongguan Hust Tony Instruments Co.,Ltd.
|
230V Vertical Hammer 5J Mechanical Strength Test Device Conforms To IEC60068-2-75
|
...Hammer 5J Mechanical Strength Test Device Product Introduction This vertical impact test apparatus is designed and manufactured according to the standard requirement of IEC60068-2-75 Test Ehc.. It is used to test the enclosure mechanical strength of the ......
Guangzhou HongCe Equipment Co., Ltd.
|
Multi-position Mobile Manual Release Socket Mechanical Strength Test Device
|
... assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its mechanical strength. Usage environment: Power supply:...
Sinuo Testing Equipment Co. , Limited
|
1-720°/Min Mechanical Strength Test Device Transmission Shaft Torsion Testing Machine
|
... shaft torsion testing machine Torsion speed 1-720°/min Mechanical Strength Test Applicable standards: GB/T 10128-1998 "Metal torsion test method at room temperature" GB/T 10128-2007 "Metal torsion test method at room temperature......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
SS Series Acceleration Mechanical Shock Test Machine / Impact Test Machine
|
...Mechanical Impact Test Device SS Series Mechanical Acceleration Shock and Impact Test Machine application: Mechanical Acceleration Shock and Impact Test Machine is mainly used for small products for impact test, to assess the product’s ability to withstand shock damage. It is often used in electronic components, electronic circuit boards and other environmental testing. Mechanical Acceleration Shock and Impact Test......
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
MIL-STD MTS Mechanical Shock Test Machine Performed Shock Test Experiment
|
...semiconductor devices to withstand moderately severe shocks resulting from suddenly applied forces or abrupt changes in motion encountered during mishandling, improper transportation, or field operation. Shocks of this type can cause devices to degrade in...
Labtone Test Equipment Co., Ltd
|
Destructive Insertion Force Crushing Strength Tester , Tensile Durability Test Machine
|
... the deformation of the specimen during the test. The device has two chucks connected to the photoelectric encoder mounted on the top of the measuring device through a series of transmission mechanisms. When the distance between the two chucks changes,...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC60745-2-5 Circular Saw Switch Endurance And Lower Guard Recovery Time Test Device
|
...Test Device Comply with standards: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Model:YW-1185 Purpose: Test the mechanical strength, durability test and recovery time test......
KingPo Technology Development Limited
|
Back Seat Surface Fatigue Tester , Sofa Backrest Surface Durability Test Machine
|
...frame for durability and tilt the chair back two mechanical testing device. Fixed office chair casters, chair backrest certain strength, speed and testing requirements for backrest action to assess the quality of the product. The Main Technical Parameters:...
Dongguan Zhongli Instrument Technology Co., Ltd.
|