Alloy 400, Monel® 400 Nickel Alloy Pipe ASTM B165 and ASME SB165 UNS N04400
|
Alloy 400, Monel® 400 Nickel Alloy Pipe ASTM B165 and ASME SB165 UNS N04400 Alloy 400 is a high strength Nickel, Copper alloy with superb corrosion resisting properties that make Monel 400 a great choice for a range of environments including sea water , hydrofluoric, sulphuric acids and alkalies. Monel 400 is a combination of nickel and copper and is hardened by cold working only. This alloy......
TOBO STEEL GROUP CHINA
|
ASME SB165 UNS N04400 Monel 400 Nickel Alloy Pipe 66Ni/34Cu Seamless Pipe
|
ASME SB165 UNS N04400 / Monel 400 Nickel Alloy Seamless Pipe ASME SB165 Monel 400 Nickel Alloy Pipe are its superior corrosion resistance in demanding environments (especially seawater and hydrofluoric acid), its immunity to chloride stress corrosion ......
Yuhong Group Co.,Ltd
|
ASTM B163 Corrosion Resistance Monel 400 Nickel Alloy Pipe
|
Alloy Monel 400 Nickel Alloy Pipe Different Standard Monel 400 UNS N04400 DIN W. Nr. 2.4360, 2.4361 Chemical composition: Ni: 63.0 MIN Cu: 28.0-34.0 Fe: 2.50 MAX C: 0.30 MAX Mn: 2.00 MAX S: 0.024 MAX Si: 0.50MAX Physical properties: Density: 8.80g/cm3 Melting range: 1300-1350℃ Metallographic structure of Monel 400: The structure of Monel400 alloy is a high - strength single - phase solid solution. Corrosion resistance of Monel 400: Monel400 alloy...
TORICH INTERNATIONAL LIMITED
|
Alloy Monel 400 Nickel Alloy pipe
|
Alloy Monel 400 Nickel Alloy pipe Quick detail: Similar material grade :UNS:N04400 , DIN: NiCu30Fe W-Nr: 2.4360 GB/T: MCu-28-1.5-1.8 BS: NA 12:Ni68Cu28Fe Size: Tubes:OD: 1/2“ -3” 12.0-76.2mm WT:0.02”-0.5” 0.5-12.0mm Length: Ft 105ft 32 32mt Pipe: NPS1......
Torich International Limited
|
NO4400 90 Degree Steel Pipe Elbow LR Monel 400 Nickel Alloy Pipe Fittings
|
'' NO4400 Pipe Elbow Nickel Alloy Pipe Elbow Seamless LR 90D Elbow Monel400 '' Specifications Grades: lloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC Standards: ASTM. ASME ANSI B16.9. B16.28. MSS-SP-43. Specifications: ASTM B366 / ......
TOBO STEEL GROUP CHINA
|
Monel 400 Nickel Alloy Seamless Pipe UNS N04400 DN10 - DN200 With SCH40S ASTM
|
Monel 400 Nickel Alloy Seamless Pipe UNS N04400 DN10 - DN200 with SCH40S Standard ASTM Manufacturer of Nickel 400 Annealed Pipe, View Price List of Alloy 400 Seamless Pipe Specification Chart of Monel 400 Pipe ASTM Specification ASTM B725 / ASME SB725 Standard ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB Monel grade 400 EFW Pipe size 5.0 - 1219.2 mm Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. Monel 400 Pipe...
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
|
Monel 400 Nickel Alloy Steel Seamless Pipe Tube ASTM B163 Inconel 625 GH3625
|
... range up to 1000 F. It is regarded as being a ductile Nickel-Copper alloy with resistance to a wide variety of corrosive conditions. This alloy is most frequently applied in a range of environments going from mildly oxidizing through neutral and to...
Qingtuo Metal Products (Qingdao)Co.,Ltd
|
Monel 400 Nickel Alloy Round Pipe 10mm Stainless Seamless Steel
|
Monel 400 nickel alloy stainless steel seamless steel round pipe Specification monel 400 tube steel wire rod alloy 400 nickel bar Monel K500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Monel K500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy......
Jiangsu Taigang Puxin Stainless Steel Co., Ltd.
|
Monel 400 Nickel Alloy Butt Weld Pipe Fittings Seamless Steel Pipe Reducer
|
Monel 400 Nickel Alloy Butt Weld Pipe Fittings Seamless Steel Pipe Reducer Nickel Alloy Buttweld Pipe Fittings Monel alloy is nickel copper alloy contain nickel with copper and small amounts of iron and manganese. Monel 400 is the typical one. Monel 400 reducer are used where high strength is required compared to pure nickel fittings. They suit for a wide range of environments such as seawater and other corrosive applications. Nickel Alloy Pipe...
ZIZI ENGINEERING CO.,LTD
|
Monel 400 Nickel Alloy Fasteners Hex Head Cap Screw Size M1.4 - M24 DIN 912
|
...Monel 400 Nickel Alloy Fasteners Hex Head Cap Screw Size M1.4-M24 DIN 912 1. Fasteners Specification: 2.Monel 400 description Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400......
Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
|
Submit your “monel 400 nickel alloy pipe” inquiry in a minute :