ASME/ANSI B16.9 Alloy 400 ASTM/UNS N04400 Threaded Flange 14" Class900
|
...N04400 Threaded Flange 14" Class900 Flange Type ASME/ANSI B16.9 Alloy 400 ASTM/UNS N04400 Threaded Flange 14" Class900 Standard ASTM/UNS Size 1/2’’~60’’ Pressure Rate 150lb to 2500lb Manufacturing process Push, Press, Forge, Cast, etc. Material Alloy Carbon steel ASTM A 105 Allloy steel flange ASTM A182 F5; F11;F22;F91;F51 ASTM A350 LF1; LF2; A350 LF3 ;LF4;LF6;LF8 Stainless Steel flange......
TOBO STEEL GROUP CHINA
|
monel 400 UNS N04400 threaded flange
|
...,Orifice flange;Reducing flange; API flange;Compact flange;Spectacle blind,Lind spade and spacer,Paddle spacer; Orifice plate;tube plate, tube sheet, Bleed ring, square flange, girth flange, hub flange, API flange Alloy Type UNS Number(s) Alloy Ni-Cr-Co...
AW SUNNY STEEL
|
N04400 WNRF Flanges ASTM B564 Compliant High-Performance Corrosion Resistant Flanges
|
Monel 400 WNRF Flanges (ASTM B564 N04400) - High-Performance Corrosion Resistant Flanges 1. Introduction to Monel 400 WNRF Flanges Monel 400 (UNS N04400) weld neck raised face (WNRF) flanges, manufactured under ASTM B564 standard, deliver exceptional ......
Yuhong Group Co.,Ltd
|
Alloy 400 UNS N04400 2.4360 Monel 400 threaded flange
|
UNS N04400 Other common names: Alloy 400 Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be......
Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
|
1500# 2500# 1/2" - 2 1/2" ASTM B564 UNS N04400 Monel 400 Threaded Flange
|
1.About monel 400 UNS N04400 Other common names: Alloy 400 Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution ......
Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
|
A105 ANSI ASME DIN Forged Steel Flange Carbon Steel Threaded Flange With NPT BSPT
|
...Threaded Flanges With NPT BSPT The A105 threaded flange design (also called a 'screwed flange') uses a screw thread to connect the flange to a pipe. A male thread is cut onto a pipe end whilst a female thread is cut into the bore of the flange; the male threaded pipe is then screwed into the female threaded flange.Threaded flanges......
SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD（Pipefittings Department)
|
TR Stainless Steel Threaded Flange
|
Threaded Flange TR ASTM A182 ANSI B16.5 Threaded Flange The threaded flange manufactured in accordance with ASME B16.5 is similar to the slip on flange, but the bore shall have a taper pipe thread conforming to ASME B1.20.1. The thread shall be concentric with the axis of the flange opening, and variations in alignment (perpendicular to the flange face) shall not exceed 5 mm per meter. Threaded flanges......
Kasugai Shanghai Co., Ltd.
|
Alloy Steel Plate Type Forged Threaded Flange Carbon Steel Flanged Fittings
|
...Threaded Flange Carbon Steel Flanged Fittings Alloy threaded flange ;Steel Plate Type threaded flange ; Forged Threaded Flange Carbon Steel Flanged Fittings NO. FLANGE STANDARD SIZE PRESSURE RATING TYPES 1 ANSI/ASME FLANGE B16.5 1/2”-24” LBS: 150,300,400,600,900,1500,2500 SO,WN,SW,BL,TH,LJ,RED 2 ORIFICE FLANGE B16.36 1”-24” LBS: 300,400,600,900,1500,2500 SO,WN,TH,RED 3 LONG WELDING NECK FLANGE...
Hebei Paris International Trading Co.,LTD
|
Hot Dipped Galvanized 600LB PN100 Threaded Flange Connection
|
Thread Flange Manufacturer Hot Dipped Galvanized Threaded Flange, 600LB (PN100), ASTM A182 F304, F316, BS Key Specifications/Features Type: Thread Flange, Threaded Flange. Material: ASTM A182 F304/304L, F316/316L/F316H. Standard: BS 4504, EN 1092. Pressure: 600LB (PN100). Size range: 1/2-6 Inch (DN15-DN150). Coating: Galvanized, Hot Dipped. Flange Normal Diam. O.D. Flange Thk. Of Flange Min Diam. of Hub Diameter of Raised Face Length Hub Thread...
CANGZHOU YOVO PIPE INDUSTRY CO.,LTD
|
Titanium Threaded Flange Gr5 ASTM B16.9 Dn50 Pn25 Petroleum chemical
|
... flange has internal threads that allow it to be connected to the external threads on the pipe or fitting. Titanium threaded flanges are available in various grades, including Gr5, and are designed to meet the ASTM B16.9 standard. This standard defines the...
Baoji City Changsheng Titanium Co.,Ltd
|
Submit your “n04400 threaded flange” inquiry in a minute :