2 Units Grease Roll Stability Testing Equipment For Gear Grease 21~38°C ASTM D1831
|
... operating this instrument: a specified amount of test sample is subjected to a 2-hour test on the roller tester at room temperature, after which the working penetration of the grease is measured before and after the test. This instrument is suitable for...
Shandong Shengtai instrument co.,ltd
|
IEC 61125 ASTM D2440 Insulating Oil Oxidation Stability Testing Machine
|
... at 120℃ in the presence of a solid copper catalyst whilst bubbling a constant flow of air. The degree of oxidation stability is estimated by measurement of volatile acidity, soluble acidity and sludge. Features This instrument is bench-mounted,...
Advanced Instruments Co.,Limited
|
Rancimat Method EN14112 Biodiesel Oxidation Stability Test Machine
|
...Oxidation Stability Tester by Rancimat Method Introduction: ● Test standard:EN 14112 & EN 15751 ●Temperature controlling:PID digital controller,temperature is controlled separately. ● Gas source:special membrane pump 10L/H ● Temperature controlling method:electrical heating rod ● Working temperature:ambient~150±0.1℃ ● Test time:about 14 hours ● Power supply:AC220V±10% 50HZ ● Test unit:2 tubes tests separately,it’s convenient to test...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
EN13150 Mattress Testing Machine Horizontal Impact Stability Testing Machine
|
.... This machine uses a basketball impactor impact sample, through a height of 40mm. Please see if the article of furniture overturned during the testing. Testing Standards: IS:5967,BS 4875-8,EN13150 Feature of Mattress Testing Machine The bottom panel of...
SKYLINE INSTRUMENTS CO.,LTD
|
Standard EN 1022 EN 1729 Chair Seats Stability Testing Machine TNJ-023
|
...seats (such as chairs, office chairs) forward stability. Principle: Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article ......
Dongguan Hust Tony Instruments Co.,Ltd.
|
IEC61010-1 Clause 7.4 Electrical Safety Testing Circular Stability Testing Machine
|
....1 of IEC60335-1, clause 8.6.2.2 and clause 8.6.5 of IEC62368-1, clause 4.13.4 of IEC60598-1, clause 9.4.2.1 of IEC60601-1, and clause 7.4 of IEC61010-1. The circular stability testing equipment is equipped with cup-type casters. When testing, the cups are...
Pego Electronics (Yi Chun) Company Limited
|
White B-T-504 GS-98709-09Thermal Stability Testing Machine Power 220V 50HZ SUS#304
|
.../performance of battery modules, battery packs, Li-ion battery,and other battery components; l The GB/T2423.4 test method:Lithium-ion battery was placed in an alternating temperature environment of (-40±2)℃~(85±2 )℃,it takes within 30mins for the...
BOTO GROUP LTD
|
Energy Saving Two Zone Thermal Shock Chamber / Stability Testing Machine
|
...Saving Two Zone Thermal Shock Testing Chamber/Stability Testing Machine Product Description Vertical Type Two Zone Basket Transition Thermal Shock Chamber is very effective in subjecting products to a thermal shock test by a specimen basket traveling and ......
Dongguan YiCun Intelligent Equipment Co.,Ltd
|
IEC 811-3-2 Thermal Stability Test Machine For Electric Cable PVC Insulation
|
...-3-2:1985 Electric Cables Insulating And Sheathing Materials PVC Compounds Thermal Stability Test Machine Scope of application: It is mainly suitable for the insulation and sheath test of PVC mixture of wires and cables. Standards: UL758, UL1581,UL62,ASTM,......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Thermal Stability Testing Machine Insulation And Sheath Tests Of Polyvinyl Chloride Mixtures Applicable To Wires And Cables.
|
... test standards. Ii. Uses Insulation and sheath tests of polyvinyl chloride mixtures applicable to wires and cables. Temperature range: Room temperature to 250℃. 3. Timer: 0 to 99.99 seconds. 5. ......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
