Long Shank Roughing End Mill / Solid Carbide Corner Radius End Mills
|
...Roughing End Mill Cutter Corner Radius End Mills Material Tungsten carbide TRS >4000 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2-0.6μm Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter 1.0mm-20mm standard and non-standard. Cutting Form Square,Ball nose, Corner Radius......
Supal (Changzhou) Precision Tools Co.,Ltd
|
1-20mm Carbide Roughing End Mills Segment Corner Radius Milling Cutter For Steel
|
... capacity, widely used in solt, profile, rough milling 2.Improves rigidity and surface finish effectively.Cutting edge over the center reduces the cutting resistance. High capacity of junk slot ......
Zhuzhou Sanyinghe International Trade Co.,Ltd
|
AlTiN NANO Coating HRC55 Roughing End Mills 4 Flute 6mm / 8mm Diameter
|
...solid carbide Roughing end mill AlTiN Coating Made by 5 AXIS CNC grinder Checked by Zoller Inspection Equipment Workpiece upto HRC50 Standard Type Type Square end mill, ball nose end mill, corner radius end mill and aluminium alloy end mill Material ......
INMIND TOOLS CO.LTD
|
Solid Carbide Corner Radius End Mills , R0.1 / R4.0 Solid Carbide Roughing End Mills
|
...milled shoulder. Corner radius end mill cutters have a stronger milling edge than square end mills, so feed rates may be increased and yield longer tool life and greater productivity. These milling bits may also be used in mold profiling applications with...
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD.
|
Metric End Mill 3 Flute Carbide Roughing End Mills For Wood CNC Milling Cutter
|
...end mill 3 Flute Carbide Roughing End Mills For Wood CNC Milling Cutter Roughing End Mills, also known as ripping cutters or hoggers, are designed to remove large amounts of metal quickly and more efficiently than standard end mills. Product name HRC50 3 Flutes Roughing End Mills for Aluminum /Wood Feature Coarse pitch high-efficiency rough milling Suitable for Aluminum/ wood material Machine type CNC Milling......
Changzhou Ruilida Tools Co., Ltd.
|
Solid Carbide Hard Metal 3 Flute Roughing End Mill, CNC Roughing Milling Cutter
|
...Roughing End Mill, CNC Roughing Milling Cutter Application Roughing End Mills Roughing end mills feature nicks or serrations along the cutting edge which act as mechanical chip breakers to produce shorter, more manageable chips. Typically used in “roughing” applications where deep depths of cut and low horsepower machine capability are present. View Roughing End Mill......
Changzhou Xinpeng Tools Manufacturing Co.,Ltd
|
High Precision Carbide Roughing End Mills / Wave Edge Cutters With 1-4 Flutes
|
... Carbide Roughing End Mills / Wave Edge Cutters With 1-4 Flutes Thread end mill cutter Features: Tungsten Carbide,Solid Carbide,Cemented Carbide Typically 1-4 flutes Standard & high performance offering Square,Ball,Radius or Chamfer Cutting Ends Standard,......
Zhuzhou Weikeduo Cemented Carbide Co., Ltd.
|
CNC HRC55 Carbide 3 Flute Roughing End Mill Cutter For Aluminum
|
CNC HRC55 Carbide 3 Flute Roughing End Mill Cutter For Aluminum HRC55 Carbide 3 Flute Roughing End Mill Rough Skin Milling Cutter For Aluminum Description of Roughing End Mill 1. material High quality cemented carbide bars with higher hardness and wear ......
Shenzhen Bwin Precision Tools Co., Ltd.
|
GREWIN HRC55 Copper coated 4F Tungsten Carbide Flat Roughing End Mill
|
...Roughing End Mill Micro grain raw material Grain size: 0.4-0.6μm Co 10%, 12% TRS >3600 N/mm2 Hardness HRA 91.8-92.5 Work piece HRC45-50 HRC55-60 HRC65 HRC68 Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9 mm; 1-20 mm Diameter of rods 4-20 mm Length 50-100 mm Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc Flutes No. 1-7 Introduction of the carbide materials of the End mill...
Zhuzhou Grewin Tungsten Carbide Tools Co., Ltd
|
Straight Shank Roughing End Mills for Roughing Machine 10mm 20mm Diameter
|
...Roughing End Mills for Roughing Machine 10mm 20mm Diameter Description Rough end mill could cut faster and consume less power. We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills......
Dongguan Diamond Hardware Factory
|
Submit your “radius roughing end mills” inquiry in a minute :