Insulation Reinforcement Woven Fiberglass Roll White 50m
|
Plain Woven Fiberglass Cloth Roll -50°C To +260°C Temperature Range *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-......
Hejian Zhongchi JIAYE Thermal Insulation Material Co., Ltd.
|
425gsm Twill Fiberglass Cloth Woven Fiberglass Roll 1000N/50mm Tensile Strength
|
...Woven Fiberglass Fabric with 1000N/50mm Tensile Strength Product Introduction Woven Fiberglass Fabric is made of high-quality fiberglass material, with a temperature resistance of up to 550℃. It is available in widths of 1000mm-2000mm and thicknesses of 0.2mm-6mm. It also has an excellent flammability rating of UL94V-0. The fiberglass woven......
Yidun (Jiangsu) High Temperature New Material Technology Co., Ltd.
|
3788 High Temperature Fiberglass Cloth , 12H Stain Woven Fiberglass Fabric Roll
|
...Fiberglass Cloth , 12H Stain Woven Fiberglass Fabric Roll 1. Product description E-Glass Woven Rovings are bidirectional fabric made by interweaving direct rovings. E-Glass Woven Rovings are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. E-Glass Woven Rovings are a high-performance reinforcement......
Changshu Jiangnan Glass Fiber Co., Ltd.
|
1.3mm Bulk Woven Fiberglass Cloth Heat Insulation Roll Engine Exhaust Pipe Covers
|
1.3mm Bulk Woven Fiberglass Cloth Heat Insulation Roll Engine Exhaust Pipe Covers TGF 1000-HT is a heavy weight woven texturized fiberglass fabric,treated with heat clean. Texturized fiberglass fabrics are woven by textured E-glass yarns with 9μm and 6μm......
Suntex Composite Industrial Co.,Ltd.
|
666 C SS Woven Fiberglass Fabric Reinforced With SS Wire With 2-Sides Black Silicone Coating
|
...Woven Fiberglass Fabric Reinforced With SS Wire With 2-Sides Black Silicone Coating Product Description Glass fiber cloth can be used as a fireproof material in industry. Fiberglass can withstand high temperatures. We use fiberglass yarn to produce fiberglass cloth. In order to increase the strength of the cloth. We mix fiberglass......
SHENGHE(CHANGSHU)ENVIRONMENTAL TECHNOLOGY CO.,LTD
|
Heat Reflective Material Aluminum Foil Facing Coated Woven Fiberglass
|
... Material Aluminum Foil Facing Coated Woven Fiberglass Woven Roving is composed of direct roving woven into a fabric .Theconstruction of woven roving gives bi-directional(0./90.) reinforcement andthe strength of continuous filaments .It is compatible......
Shanghai Huiyi International Co., Ltd.
|
550g 650g Fiberglass Woven Roving Roll GRP Twill Weave Fabric
|
...fiberglass, with plain weave of glass roving. Can be used in filament winding pipe, storage tank etc. Introduciton: C glass and E glass woven roving (200g-800g). Woven roving is a bidirectional fabric made by interweaving roving in plain weave pattern. The construction impants to the fabric and excellent dimensional stability during handling. The fiberglass woven roving is elementary material of GRP with reinforcement......
Anhui Jinjiuding Composites Co., Ltd.
|
10x10 100g/m2 Incombustible Plain Woven Fiberglass Cloth
|
...100g/m2. The width is normally 100cm and the roll length can be from 50m to 500m. It has the advantages of incombustible, anticorrosion, resistant to high-temperature, thermostable, low coefficient of deformation, etc. The fiberglass woven fabric is with...
Ningbo Ciheng Fiberglass Co., Ltd
|
Rogers DiClad 870 Woven Fiberglass Microwave PCB 125mil Reinforced PTFE Based
|
...Woven Fiberglass Reinforced PTFE-based 31mil 93mil 125mil Microwave PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description DiClad 870 laminates are woven fiberglass/PTFE composite materials for use as printed circuit board substrates. In comparison to nonwoven fiberglass reinforced PTFE-based laminates of comparable dielectric constants, the woven...
Bicheng Electronics Technology Co., Ltd
|
Rogers DiClad 870 PCB Woven Fiberglass Reinforced PTFE-based 31mil 93mil 125mil Microwave PCB
|
...Woven Fiberglass Reinforced PTFE-based 31mil 93mil 125mil Microwave PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description DiClad 870 laminates are woven fiberglass/PTFE composite materials for use as printed circuit board substrates. In comparison to nonwoven fiberglass reinforced PTFE-based laminates of comparable dielectric constants, the woven...
Shenzhen Bicheng Electronics Technology Co., Ltd
|
Submit your “reinforcement woven fiberglass roll” inquiry in a minute :