Home > Chemicals > Inorganic Chemicals > Graphite Products >

Release Agent Silicone Mold Additives

1-10 Results for

release agent silicone mold additives

from 160 Products

Dip Product Lead Free Brass Casting Releasing Agent Graphite Molds For Copper

Dip-Product&Lead-Free Brass Casting Graphite Releasing Agent Graphite Molds For Copper Graphite Mould Releasing Agent Our standard mould releasing agent is named I75L. It is a powder made on the basis of graphite and other carbon and mineral materials. ......

Qingdao Hensen Graphite Co., Ltd.

Address: No.69 Binhai Road, Naihai, Wendeng, Weihai

Solvent Based CPU Release Agent , Aerosol Mold Release Agent Brighter Surface

...Mold Release Agent for CPU Advantages: Stronge demoulding ability Easy to use Brighter surface suitable for TDI/MDI/NDI and other systems Application: Molds should be clean before using. Apply a thin coat of our release agent. Wait until the water is evaporated. Start production More release agent......

Shanghai Lorechem Company Limited

Address: Floor 2-3, Building 20, Hongxing International Plaza, Lane 1818, Lianhang Road, Pujiang, Shanghai

Shin-Etsu KM-740T Rubber Resin Release Agent Silicone Emulsion

...℃) Ionic character Nonionic pH value N/A (Not specified) Product Introduction Shin-Etsu KM-740T is a low-viscosity dimethyl silicone fluid emulsion designed for industrial applications. It requires storage in cool, dark conditions (1-25℃) and must...

Shenzhen Huazhisheng New Material Technology Co., Ltd.

Address: 101, No. 130 Fengping Road, Shitouling Industrial Zone, Wulian Village, Fenggang Town, Dongguan City, Guangdong Province, China

Industrial Grade Silicone Release Agent Spray , Transperant Aerosol Mold Release Spray

... agents are used in die cast release, mold release, tire release, plastic release, and concrete release solutions, among other solutions. Spodin Mold Release technology enables quicker release of products made in molds, such as tires and food containers,...

Plyfit Industries China, Inc.

Address: Room2203, 19th floor, Jinhua Building, Longfeng 3rd road,Longhua new district,Shenzhen,Guangdong China

Kanglibang Water Based Sprayed Silicon Mold Release Agent for Compression Molding Silicone rubber Production

... effect and would not transfer to the products itself. Over 5 times long-term using, also can be used as cleaning agent in the releasing process. Mainly apply to silicon rubber producing, especially for high quality requested silicone rubber releasing from...

Shenzhen KangLiBang Technology Co., Ltd

Address: H Building, 3rd Xinwei Industrial Park, Dalang Street, Longhua New District, Shenzhen City, Guangdong Province, China.

2% Silicone Additives Thixotropoic Agent For Brushing Silicone Mold Making Material

Silicone Additive Thixotropoic Agent For Addition Curing Silicone Rubber For Making Molds By Brushing Way PRODUCT DESCRIPTION Thixotropic Agent is an additive for addition cure silicone elastomers that are silica filled. When used at 0.5-2% level this additive creates excellent thixotropic properties. Thixo Agent AC when used with silica filled platinum cured silicone......

MINGCHENG GROUP LIMITED

Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China

Polyurethane Mould Release Agent Oil Based For Shoe Sole

...Release agent PU-1032 Mould release agent oil base for the shoe sole Characteristic: The PU-1032 is a kind of release agent which is combined by silicone resin and Silicon oil The main components are MQ Silicon resin and silane. It is mainly used for: polyurethane molding, FRP process molding......

JOYWAY INDUSTRIAL COMPANY LIMITED

Address: 904, Block A, China Europe International Building, Zhangdian District, Zibo City, Shandong Province

High and Low Temperature Resistant Release Agent Methyl MQ Silicone Resin EX-03

...metal molds. Applications Polyurethane release parts: especially the release of polyester polyurethane soles. Automobile and furniture related: micro honeycomb automotive parts, full leather furniture (integrity surface), and other automotive parts such...

Qingdao Exceed Fine Chemicals Co.,Ltd

Address: No.166, Zhengyang Middle Road, Chengyang District, Qingdao City, Shandong Province, China. 266000

Electrical Insulator Mould Release Agent , Viscous Casting Chemical Auxiliary Agent

...Mold Mould Release Agent for Electrical Insulators TDS: Performance parameters: Aspect Unit Value colour and lustre — Transparent liquid Viscosity mPa.s 15 Flash point ℃ 65 Spread rate ㎡ 20-25 Density g/mm3 0.90-0.92 Product Description: JT 6101 Organic Silicon Mould Release agent Features: Good release effect high stability No reaction with the casting material Not corrode the mold......

JIANGTE INSULATION COMPOSITE

Address: RM1204, Greenland Center of Financial City, No.662 Huangpu M Avenue, Tianhe District, Guangzhou, China.

Silicone Ice Cube Tray 100% Food Grade Silicone Rubber With FDA Standard Soft Silicone Mold

... are vulcanized by addition curing. Component A contains catalyst and component B functional polysiloxane as curing agent. Compared to peroxide curing, liquid silicone rubbers do not release any curing by-products. Style NO. 6250-18 End use food mold,...

Guangzhou Ruihe New Material Technology Co., Ltd

Address: No.117 Fengshen Avenue, Xiuquan Street, Huadu District, Guangzhou,China

Submit your “release agent silicone mold additives” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Guangzhou Ruihe New Material Technology Co., Ltd Products: Silicone Ice Cube Tray 100% Food Grade Silicone Rubber With FDA Standard Soft Silicone Mold
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “release agent silicone mold additives” inquiry

*From:
Your email address is incorrect!
To: Qingdao Hensen Graphite Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0