Anaesthetic Respiratory Equipment Conical Connector Tester EN ISO 5356-1:2015
|
EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge according to Figure A.1 and Table A.1, by applying an axial ......
KingPo Technology Development Limited
|
40L/Min~100L/Min Respiratory Resistance Mask Tester GB 2626-2006 / GB 2890-2009
|
...Respiratory Resistance Mask Tester GB 2626-2006 / GB 2890-2009 Main application: It is used to determine the resistance to inhalation and exhalation of respiratory protective equipment under specified conditions. Applicable to the national labor protection equipment......
Dongguan Guo Feng Testing Machine Co., Ltd.
|
EN149 Respiratory Breath Resistance Tester Laboratory Test Equipment
|
...tester and respirator respiratory resistance tester: The test flow (85±1)L/min 0.1L/min was better than ±2.5% Tooling head large, medium and small (new standard) Pressure range ±1500Pa 0.1Pa is better than 1% Data stores 500 groups Overall size (W×D×H) (600*600*750)mm The weight of the machine 35kg The power consumption 1.3w Equipment......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Electric Battery Mobile Phone Testing Equipment , Extract Tester
|
... Electric type Weight 60kg Volume Electric Insert & Extract Testing Test standard GB Equipment Overview The tester used to do kinds of connector insertion and extraction test, which can show change value and peak value, speed value, and can set times,...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
EV Charging Connector Flexibility Testing Equipment Durability Tester IEC 62196
|
....4. Product Overview The EV Plug Flexibility Testing Machine is specifically designed to evaluate the mechanical strength of electric vehicle charging connectors, industrial plugs, sockets, and couplers. It focuses on testing the flexing performance at the...
Sinuo Testing Equipment Co. , Limited
|
IEC 60320-1 Single Station Coupler Pulling Test Equipment Connector Test For Household
|
... purposes- Part1:General requirements" clause 23.3 and figure 19. Test principle For Coupler Pulling Test Apparatus: Insert the connector into the device inlet corresponding to the type of connector to be tested and in accordance with the...
Sinuo Testing Equipment Co. , Limited
|
IS9873/ISO8124-4 Toys Testing Equipment Durability Tester for Suspension Connector of Swings
|
... of children when they are playing on swings, a durability test machine is recommended to check if the suspension connector is robust enough after many times of use. Procedure Attach each type of swing element to its support member in accordance with the...
SKYLINE INSTRUMENTS CO.,LTD
|
Oxygen Micro Blender Nylon Mesh Filter 48 Micron For Respiratory Equipment
|
Oxygen Micro-Blender Nylon Mesh Filter 48 Micron For Respiratory Equipment An oxygen micro-blender filter is a component used in respiratory equipment to accurately mix and deliver a specific concentration of oxygen to patients. It is typically used in ......
Share Group Limited
|
High Voltage Flexible Cable Testing Equipment Flexing Tester AC 380V / 50HZ
|
High Voltage Flexible Cable Testing Equipment Flexing Tester AC 380V / 50HZ Product information: This cable tester is designed and manufactured in accordance with the standard requirement of IEC60245.2 clause 22.7. It is used for checking mechanical ......
Guangzhou HongCe Equipment Co., Ltd.
|
Low Cost Mechanical Shock Test Equipment Shock Tester for Battery 100g @ 11ms
|
...Equipment Shock Tester for Battery 100g @ 11ms Technical Parameters Main parameters of the shock tester HSKT10 Operating platform 200 × 250 mm Max. load 10KG Peak acceleration 20 to 2000G Pulse duration 0.2~18ms Equipment dimensions 660 × 700 × 2380 mm Equipment......
Labtone Test Equipment Co., Ltd
|
Submit your “respiratory equipment connector tester” inquiry in a minute :