Gate Valve Pneumatic Linear Actuator 10Mpa Pressure -20℃~+80℃ 1 Year Warranty
|
... service life. With a maximum pressure up to 10Mpa, the Linear Pneumatic Actuator can meet the requirements of high-pressure applications. The noise level is low and stable, up to 45dB, which is suitable for a variety of applications. In addition, it also...
Veson Valve Ltd.
|
Samson Steel 3709 Solenoid Control Valve Positioner For Controlling Pneumatic Linear Actuators
|
...air supply falls below an adjusted value or upon complete air supply failure. This causes the actuator to remain in its last position. Special features The pneumatic lock-up valve shuts off the signal pressure line either when the air supply falls below an...
Xiangjing (Shanghai) M&E Technology Co., Ltd
|
8 BAR DIN 5482 Pneumatic Linear Actuator With Butterfly Valve
|
Pneumatic actuator with butterfly valve CP Pneumatic Actuators are suitable for 90-degree opening and closing of Butterfly Valves, VSS-type Ball Segment Valves, as well as DVA-type Diverter Flap Valves. CP actuators come with splined shaft coupling bush ......
Shandong Encke Imp&Exp Co.,LTD
|
Non-Rising Stem Resilient Seated Gate Valve with Actuator Interface
|
...Rising Stem Resilient Seated Gate Valve With Special Actuator Interface Introduction to Gate Valve Structural Features: Concealed stem design (the valve stem does not rise or fall noticeably with the valve, saving space and protecting the valve stem); elastic rubber seat ensures sealing and wear resistance; flange connection adapts to pipe installation; the red component on the top is the actuator......
Handan Shengnada New Material Technology Co., Ltd.
|
Ductile Iron Non-Rising Stem Resilient Seated Gate Valve With Actuator Interface for -10-200℃ Media and 18 Months Warranty
|
Non-Rising Stem Resilient Seated Gate Valve With Special Actuator Interface Product Specifications Attribute Value Product Name Non-Rising Stem Resilient Seated Gate Valve With Special Actuator Interface Key Words Gate Valves Power Manual Media Oil, Water......
Handan Shengnada New Material Technology Co., Ltd.
|
Rising Stem Gate Valve Electric Actuator Operated For Steel Industry
|
... and two-piece bodies, rising stem and non-rising stem, uni-direction and bi-direction structures, resilient and metal seat rings, bonnetless and bolted bonnet designs. For optional designs, ......
Zhejiang TongJiang Holdings Company
|
Soft Seated Cast Iron Water Gate Valve Non Rising Stem Resilient WCB Body
|
... Metal-to-metal seat Renewable seat ring and stem backseat Manual operation standard, gear operator and actuation available Butt weld end Flange end: raised face or ring type joint Size:2"~40" Pressure:150LB ......
Suzhou Ephood Automation Equipment Co., Ltd.
|
Carbon Steel JIS 13%CR WCB Flanged RF OS&Y BB Rising Stem Gate Valve
|
...Valve JIS10K/20K OS&Y, Rising stem, Flexible Wedge Bolted Bonnet,Threaded or welded seat ring ASTM , A351 CF8, A351 CF8M, A351 CF3, A351 CF3M, Standards compliance Design and Manufacture: Face to face(end to end): JIS B2002 Flanged connection: JIS B2239 Test and inspection: API598, Handwheel,Pneumatic/Electric actuator......
WENZHOU ANRY VALVE CO.,LTD.
|
Self Sealing Cast Globe Valve , Rising Stem Globe Valve Buttwelding Ends
|
...valve, bolted bonnet, rising stem Size: NPS 2"~24" Pressure Rating: Class 600~2500 Material: WCB, WCC, Wc6, Wc9, C5,C12, LCB, LCC, CF8, CF8M, CF3,CF3M, CN7M, CF8C Design & Manufacturing Standard: API 600, BS 1414 Face to Face: ASME B16.10, EN 558 Flanged Dimenson: ASME B16.5 Butt Weld Dimensin: ASME B16.25 Test and Inspection: API 598 Operation Method: Manual ,Worm Gear, Electric Actuator, Pneumatic...
Kelite Group Co., Ltd
|
Non Rising / Rising Stem Flat Gate Valve Pneumatic Diaphragm SSV
|
...Rising/Rising Stem Flat Gate Valve Pneumatic Diaphragm SSV Product Introduction The products is equipped with a unique ball screw and balance bar mechanism, greatly reducing the torque required for operation, which can reach 1/3 of that of a regular valve......
SHIFANG HUIFENG OIL PRODUCTION MACHINERY CO.,LTD.
|
