Sign In | Join Free | My benadorassociates.com
benadorassociates.com
Products
 Search by Category
Home > Electrical Equipment & Supplies > Wires, Cables & Cable Assemblies > Instrumentation Cables >

Sandpaper Abrasion Test Apparatus

1-10 Results for

sandpaper abrasion test apparatus

from 494 Products

Sandpaper Abrasion Test Apparatus ISO 6722-1 Figure 6 AC220V For Car Cable

China Sandpaper Abrasion Test Apparatus ISO 6722-1 Figure 6 AC220V For Car Cable on sale
...Sandpaper Abrasion Test Apparatus for Testing Cable of Car 1. Introduction The auto cable sandpaper abrasion test apparatus meets the requirements of ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE J1127, SAE J1128 and JIS C3406 standard. It’s applied for verify that the resistance of the cable insulation to sandpaper abrasion. Measure the “resistance to sandpaper abrasion......
Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

ISO 6722-1 Clause 5.12.4.1 Apparatus For Sandpaper Abrasion Test / Auto Cable Insulation Jacket Abrasion Resistance Test

China ISO 6722-1 Clause 5.12.4.1 Apparatus For Sandpaper Abrasion Test / Auto Cable Insulation Jacket Abrasion Resistance Test on sale
...Apparatus for Sandpaper Abrasion Test / Auto-Cable Insulation Jacket Abrasion Resistance Test Standards: ISO 6722-2006, QC/T 730-2005, JASO D608-92, JASO D611-94, SAE J1127, SAE J1128, JIS C3406 etc. Application: Applied to test the resistance to abrasion of Auto cable insulation jacket in moving condition. Technical parameters: 1. Applicable wire diameter: 0~15mm 2. Abrasive belt counting range: 0~5000mm 3. Abrasive...
KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N

China Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N on sale
...Abrasion Test Apparatus Single Station Load 4N Standard of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Feature Insulation Sleeves Of Plug Pins Abrasion Test Apparatus......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

IEC 60335 Clause 7 Dual Station Label Marking Abrasion Test Apparatus

China IEC 60335 Clause 7 Dual Station Label Marking Abrasion Test Apparatus on sale
... clause 5.1, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9. Technical parameters For Dual Station Label Marking Abrasion Test Apparatus: Test stations Two stations Test stroke 10-60mm, adjustable(Manually adjustable)...
Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 60884 Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke

China IEC 60884 Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke on sale
...Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke Standard of Apparatus for abrasion test on insulating sleeves of plug pins: IEC 60884-1: 2022 Plugs and socket-outlets for household and similar purposes -Part 1: General requirements clause 24.8 and figure 31; The Apparatus for abrasion test......
Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC62196 Electric Vehicle Label Marking Abrasion Test Apparatus

China IEC62196 Electric Vehicle Label Marking Abrasion Test Apparatus on sale
...Abrasion Test Apparatus Complied Standards & Clauses IEC 62196-1: 2020 Ed.4CDV clause 8.7, figure 8. Equipment Overview This label marking abrasion test apparatus conforms to IEC 62196-1Ed.4CDV clause 8.7, figure 8. It is used to verify the durability of marking. The test......
Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

3 Work Station Electric Wire Abrasion Test Apparatus

China 3 Work Station Electric Wire Abrasion Test Apparatus on sale
...Abrasion Test Apparatus 3 work station cable tester Technical Parameters: Power supply AC230V 50Hz Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute Test stroke 0.1mm up-and-down movement Working station 3 Weight 500±5g*3 Counter 0~999999 (can be preset) Dimension 1200×400×1400 (mm) Products Introduction: This apparatus......
Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

Electric Wire Abrasion Test Apparatus HDX1304 Single Strokes 0.1mm Test Stroke

China Electric Wire Abrasion Test Apparatus HDX1304 Single Strokes 0.1mm Test Stroke on sale
... 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application:It is used for checking the wear resistance test of the completed flexible cables. Test sample:Completed flexible cables. Feature:This test shall be...
shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Mirror Stainless Steel Alcohol Rubber Abrasion Test Apparatus

China Mirror Stainless Steel Alcohol Rubber Abrasion Test Apparatus on sale
... of mobile phone keys. It has the functions of adjustable test speed and preset data stop function. Technical Parameters: 1, the host: stainless steel 2, friction frequency: no segmentable adjustable speed ......
Guangdong Aisry Instrument Technology Co., Ltd.

Address: Jianye Road No. 3, Yongqing Second Industrial Zone, Yongqing Village, Daojiao Town, Dongguan City, Guangdong Province,china.

175g 275g Load Abrasion Testing Machine / Abrasion Test Apparatus 100W

China 175g 275g Load Abrasion Testing Machine / Abrasion Test Apparatus 100W on sale
Insertion Force Test (MY-NM-ZD)​, with competitive price, both OEM and ODM available from us Description This testing machine is widely used in all kinds of electronic appliances, aerospace, aviation, communication, electronic automobile parts, new energy ......
Shenzhen Mingyu Instrument And Equipment Co., Ltd.

Address: No.2 plant, Henglu Industrial Zone, Songgang Town, Bao'an District, Shenzhen, China, 518105.
Submit your “sandpaper abrasion test apparatus” inquiry in a minute :
*From:
Your email address is incorrect!
To:

Shenzhen Mingyu Instrument And Equipment Co., Ltd.

Products: 175g 275g Load Abrasion Testing Machine / Abrasion Test Apparatus 100W
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details:
  • --Self introduction
  • --Required specifications
  • --Inquire about price/MOQ
Your message must be between 20-3,000 characters!
 
Please reply me within 24 hours.
Yes! I would like your verified suppliers matching service!
Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.
Submit “sandpaper abrasion test apparatus” inquiry
*From:
Your email address is incorrect!
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details:
  • --Self introduction
  • --Required specifications
  • --Inquire about price/MOQ
Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!
Inquiry Cart 0