Oil Downhole Fluid Discharged Rod Insert Pump Guide Cage Flushes Sand Sedimentation Away
|
...mounted to the top by a bracket. The rod pump is suitable for sand production Wells and oil Wells, due to the discharge of fluids will wash away from guide cage between tubing and pump at the top of the sand will make it easier for pump barrel under the...
Puyang Zhongshi Group Co., Ltd.
|
Insert Pump 1 Inch Sucker Rod Pump Oil Drilling Diameter 28mm 32mm
|
...sucker rod pump: The Sucker rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. Thus it is convenient for the inspection and workover because they can be pulled up and down...
Dongying Oilman Machinery Equipment Co.,Ltd.
|
Haihua F1600 Mud Pump Valve Rod Guide (Lower), Mud Pump Fluid End HH11309.05.05.002 mud pumps for drilling rigs148
|
...Pump Valve Rod Guide (Lower), Mud Pump Fluid End HH11309.05.05.002.148, Valve Rod Guide (Lower) was used in Mud Pump Fluid End. The mud pump valve rod guide (lower), which is installed in the chamber of the cylinder, acts as a centring and positioning suction valve body assembly. It consists of a guide body and an inner sleeve, which is inserted......
Sanyuan Yinda Petroleum Machinery Co.,Ltd
|
20 Mesh Stainless Steel Water Sediment Filter For Pressure Washer Inline Strainer
|
20 Mesh Stainless Steel Water Sediment Filter For Pressure Washer Inline Strainer The high pressure washer strainer is a device designed to remove debris and impurities from the water supply before it enters the high-pressure washer. It helps protect the ......
Share Group Limited
|
Carbon Steel Downhole Oil Extraction Sucker Rod Pump
|
... by pumping units and sucker rod, which is also referred to as insert pump as its plunger is attached to, moves up and down with the sucker rod string. It is suitable for reducing the time of workover for deep well as it is not neccessary to pull all...
Xi'an TianRui Petroleum Machinery Equipment Co., Ltd.
|
National 14P220 mud pump spares, 12P160 mud pump, 10P130 mud pump, 9P100 mud pump, 8P80 mud pump, 7P50 mud pump
|
Description Part No. Description Part No. Discharge Module, Studded 1295601 Seal Retainer 1295174 Suction Module, Studded 1295604 Back Up Ring 1295175 Valve Guide Holder 1292140 Threaded Ring 1295176 Valve Guide Insert 1292141 Discharge Connector 1295252 ......
Qingdao National Premium Oilwell Machinery Co.,Ltd
|
011057-1 FLOW direct drive plunger insert; .49" OD of water jet cutting machine waterjet pump parts
|
... the gland is inserted, the circlip is used to snap into the groove on the inner side of the piston and the installation is stable. It moves in the high-pressure cylinder and contacts with the high-pressure seal, which ......
SHANDONG WAMI CNC TECHNOLOGY CO.LTD
|
ISUZU GENUINE JAPAN 6WG1 O RING FILTER SEDIMENTER 1-13213017-0 1132130170
|
...SEDIMENTER 1-13213017-0 1132130170 JIUWU POWER 6WG1 COOLER FUEL FILTER, OIL FILTER, AIR FILTER USE FOR EXCAVATOR MACHINE AS FOLLOWING: HITACHI EXCAVATOR EX300 EX300-3 SUMITOMO EXCAVATOR SH200A3 SANY EXCAVATOR SY235 / XE265,XG823,XE235 SERIES PARTS: CRANKSHAFT, CAMSHAFT, MAIN AND CON ROD BEARING, CYLINDER HEAD, CYLINDER BLOCK, OIL PUMP, WATER PUMP, FUEL INJECTION PUMP......
Guangzhou Jiuwu Power Machinery Equipment Co., Limited
|
425 lbs F-1000 MUD PUMP Rated Horsepower 1,000 HP Max Liner Size By Stroke Length 6-3/4" X 10"
|
...quot; x 10": We mainly export and produce mud pump parts, including cylinder liners, pistons, piston inserts, valve inserts, oil seals, rod packings, hydraulic ends, etc. All products meet or exceed DIN and API standards. The F series mud pumps can...
XIAN ATO INTERNATIONAL CO.,LTD
|
Rustproof Zirconia Ceramic Rod Ceramic Plunger For Pump Components
|
Corrosion-resistant Zirconia Ceramic Plungers for Pump Components Item # Compatible Ferrule Size Insertion Loss Length Connection Force Material ADAF1 2.5 mm Outer Diameter < 0.2 dB Typ. (SM)a < 1.0 dB Typ. (MM)b 11.4 mm 53 N (12 lbf) Maxe 25 N (5.6 lbf) ......
Dongguan Ming Rui Ceramic Technology Co.,ltd
|
