Heat Resistant Alloys Soft Magnetic Alloys 0.02mm Thickness 1J85 Strip Supermalloy
|
OhmAlloy-1J85 (Soft magnetic alloy) (Common Name: Ni80Mo5, E11c, permalloy, 79HMA, PCS) Ohmalloy-1J85 is a nickel–iron magnetic alloy, with about 80% nickel and 20% iron content. Invented in 1914 by physicist Gustav Elmen at Bell Telephone Laboratories, it......
Ohmalloy Material Co.,Ltd
|
Thickness 0.05~2.0mm Soft Magnetic Alloys 1J50 with High Saturation Magnetic Flux Density
|
A-ONE ALLOY supplies 1J50 soft magnetic cold rolled strip with minimum thickness 0.05mm 1J50 is a widely used soft magnetic alloy in China. It is used where high initial permeability, maximum permeability, and low core loss is needed. Density: 8.2g/cm3 ......
Suzhou Xunshi New Material Co., Ltd
|
VACOFLUX 50 highest flow density soft magnetic alloy
|
... 35mm, Qty: 120kg Hiperco50 strip, thickness 0.35mm, Qty: 1350kg Forms avaialble: Round bar: diameter 6-500mm Strip: thickness 0.05-2.0mm Character Highest magnetic saturation in all soft magnetic alloys High Curie point-980°C High magnetostriction Application......
Suzhou Xunshi New Material Co., Ltd
|
1j87 Soft Magnetic Alloy Sheet /Plate Ni79nb7mo2
|
...alloy have high initial permeability, high hardness, high resistivity, and magnetic properties are not sensitive to stress, good resistance to abrasion Main applications: Each kind of magnetic tape head of magnetic band device, chip as well as recorder, ferrite core of high frequency component Specification/size Strip(thickness*width ): 0.05mm~3.0mm......
Huona (Shanghai) New Material Co., Ltd.
|
Magnetically Shielded Soft Magnetic Alloy 1J79 Permalloy 20 - 25 KG
|
Sheet of Soft Magnetic Alloy 1J79 for Transformer Core Specifications Grade 1J79- Strip Thickness 0.1~10mm Width 20~500mm Weight of coil 2-50 kgs Condition Soft or Hard 1J79 alloy saturation magnetic induction Bs≥0.75T, Curie point ℃ = 450, Resistivity (μ......
Shanghai Tankii Alloy Material Co.,Ltd
|
Soft Magnetic Alloy Stainless Steel Bar 1j50 75mm Diameter Round Ni - Fe 65mm
|
...soft magnetic alloy, and its main compositions are about 50% Ni, 48% Fe and other micro-elements. This alloy is characterized by high magnetic permeability, higher saturation induction density, etc. As a soft magnetic material used in alternating current, vortex and loss are induced inside the material due to the alternating magnetization. The smaller the resistivity and the greater the thickness of the alloy......
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
|
2B high initial permeability soft magnetic stainless steel alloy Cold Rolled Coils
|
...100—250mm Description: Having a high or very high initial permeability and the large magnetic permeability and low coercive force, the lower the saturation magnetic induction. Applications: The high sensitivity and a small power transformer used in the...
Wuxi Shuangyong Precision Stainless Steel Belt Co., Ltd.
|
Hot Rolled Hastelloy C276 Plate 4.0mm 5.0mm 6.0mm 8.0mm 10.0mm 12.0mm 14.0mm 16.0mm 20.0mm Thickness
|
..., Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate Grade Hastelloy C276 - ALLOY C-276 (Ni/ 15Cr/ 16Mo/ 4W)-UNS N10276 , ASTM B575 UNS N10276 UNS...
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
|
Iron / Brass / Zinc Alloy Road Kings Badge with Misty Nickel Plating, Soft Magnet On Back Side
|
...: Misty nickel Attachment: Soft magnet Shipping way: UPS, DHL, FedEx….. Badge type: High quality metal badge, 3D pin badge, memorial badge, ......
pins centre company ltd
|
Fe Based Amorphous Alloys Ribbon Soft Magnetic Material
|
...Alloys Ribbon Amorphous alloy is a new soft magnetic material. It is produced through an advanced technology of rapid solidification of molten metal at a cooling rate of about a million 'C/sec. During this process the metal is rapidly quenched as a form of ribbon with 25-35 µm in thickness, and the alloys......
ZHENJIANG FRESH MARINE SUPPLY CO.,LTD
|
Submit your “soft magnetic alloy 2 0mm thickness” inquiry in a minute :