Super Duplex Dual Plate Wafer Check Valve Sea Water Duo Check Valve
|
....34 Test & inspection According to ANSI B 16.34. DIN2401. GB/T9124. JB/T74 Application The innovative double-valve structure of the H76 check valve uses two spring-loaded flaps (half-valve) suspended from a...
Wenzhou Xidelong Valve Co. LTD
|
ANSI Standard Single Plate Spring Loaded Wafer Check Valve
|
Single Plate Wafer Swing Check Valve, Spring Check Valve, NRV (ANSI Standard) Against the problem of traditional check valve, we accord AMERICA API&GERMNEY DIN, after study and research for many years, developed H76 lug body type wafer, double-disc swing ......
COOSAI valve group
|
Fully Rubber Lined Wafer Check Valves With PN10 PN16 PN25
|
....5 Face to face: ANSI DIN F48 Working temperature: -40℃~+125℃. Test and inspection: API 598. Double disc spring loaded Check Valve Epoxy powder coated inside and outside Min. 250Microns. Product Range: Body connection Type:...
SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD（Pipefittings Department)
|
Tilting Disc Wafer Check Valve, Spring-loaded Non-return Valve
|
...Wafer Check Valve Spring-loaded Non-return Valve Tilting disc check valves produce slightly more pressure drop than swing check valves of the same size. These check valves have a single-piece disc without a hinge. In response to flow forces, the disc pivots about hinge pins that are located within the geometry of the disc and slightly above the center-line of the valve......
Shanghai Kolink Valve Co., Ltd.
|
spring loaded wafer check valve
|
Whether your needs call for standard or custom valves, KCMteach Valve provides excellence in service and delivery. KCM TECHNOLOGY GROUP CO.,LTD Address: Bin Hai Economic Development Industrial Zone. WenZhou,ZheJiang Province,China Tel :+0086-577-86879200 ......
KCM TECHNOLOGY GROUP CO.,LTD
|
8 Inch Wafer Style Butterfly Valve Horizontal Spring Loaded Check Valve
|
.... Its meets API 594, which is approximately one fourth the face to face dimensions and 15% to 20% the weight,noney in initial valve coast and provides lower installation cost. The disc is litfed first by two spring to prevent.Suitable for horizontal or...
zhejiang teyi valve co.,ltd.
|
50mm Spring Loaded Check Valve Carbon Steel Dn50 ASTM A105N Dual Plate Check Valve
|
...Check Valve Carbon Steel ASTM A105N Dn50 Full Bore Single Check Valve Spring Load Product name Forged Single Disc Lift Type Wafer Check Valve Size 2Inch/DN50 Structure style Lift Check Valve Pressure 300LB Temperature -29-429℃ Medium Weak acid base medium Connection type Wafer......
ZHEJIANG VERVO VALVE CO.,LTD
|
Swing Double Disk Check Valve with SS Spring Loaded PN16 API 598 CE & ISO
|
...Check Valve , SS Spring Loaded , Wafer PN16 With CE & ISO Standards Design and manufacture as BS1868, ANSI B16.34 Face to face dimensions as ANSI B16.10 End flange dimension as ANSI B16.5 Pressure-temperature ratings as ANSI B16.34 Pressure test as API 598 Applicable Medium: water ,gas,oil,and other causticity medium. Application: Valve......
Shanghai kangquan Valve Co. Ltd.
|
Dual Plate Check Valve , Cast Iron Wafer Type Non Return Valve PN 10
|
...Check Valve with Dual Plate in Cast Iron , Wafer Type , PN 10 PRODUCT INTRODUCTION Dual Plate Check Valve The dual Plate Check Valve is an all purpose non return valve that is much stronger, lighter in weight and smaller in size compared to a conventional swing check valve or life check valve. The Dual Plate Check Valve employs two spring-loaded......
Zhejiang TongJiang Holdings Company
|
Submit your “spring loaded wafer check valve” inquiry in a minute :