SS Toys Testing Equipment , Bite Test Clamp ASTM F963 16CFR 1500.52C Standards
|
...test toy's protruding part to withstand biting force. Is a toy safety test project. Bite force tester technical parameters: Packing size: 95*45*45mm(L*W*H) Weight: 760g Material: Stainless steel Standards compliant: ASTM F963 16CFR 1500.52C Standard configuration: Biting force tester 1 set, test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
ISO 8124-1 Toys Kinetic Energy Testing Equipment Toys Testing Equipment 1.000000S
|
... the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move Energy. The main instruments used for this test launch of baby toys or children's safety....
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
ISO 8124-1 Toys Testing Equipment High Performance Scooters Slope Stability Testing Equipment
|
...the most onerous position with a mass of 50 kg+/-0,5 kg on its standing or sitting surface for 5 min. For toys labelled as not suitable for children 36 months and over, load the toy with a mass of 25 kg+/-0,2 kg. Place the toy on a 10°+/-1°slope in the...
SKYLINE INSTRUMENTS CO.,LTD
|
100kg load 2m/S Toys Testing Equipment For Wheeled Toys
|
... by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the maximum pull force. Toys will be under test placed on the conveyor belt, the drive wheel until the toy speed of 2m/s...
Dongguan Hust Tony Instruments Co.,Ltd.
|
320g Antiwear Toys Testing Equipment Aluminum Alloy moistureproof
|
...Toys Testing Equipment Rattle Sound Bell Toys Tester Description: The bell toys tester is also called the sound toys tester, the toys testing template AB and sound toys testing template. There are two kinds of template: the round one and the oval one. It stimulates the volume of the mouth to check whether the toys or the toys......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Mouth Actuated 13.8Kpa Toys Testing Equipment Catapult Endurance Tester
|
.... Standards: EN-71-1 section 8.17.1 Test principle The catapult was placed into the mouth-actuated projectile toys. Add pressure of 13.8kPa ± 5% on the mouthpiece, lasts for 5 seconds, test a total of 10 times. Detecting whether the projectile through the...
Gester International Co., Ltd
|
SS Surface Testing Equipment , Well Test Vertical Surge Tank Long Lifespan
|
Well test vertical surge tank / Crude Oil Surge Tank for Surface Well Testing Equipment Vertical surge tank - crude oil surge tank is an H2S service vertical steel pressure vessel designed to store ......
CCSC Petroleum Equipment Limited Company
|
ISO8124 / ISO6941 50W Toy Flammability Testing Equipment 220V/AC 50Hz 0.5A
|
Toy Flame Test Equipment , Toy Flammability Safety Test Apparatus Product information: This device is designed and manufactured according to ISO8124 toy safety combustion performance. Adopting the burner that conforms to ISO6941, this testing device is suitable for combustion performance testing of all kinds of toy......
Guangzhou HongCe Equipment Co., Ltd.
|
EN 71-1 ASTM F963 Light Testing Equipment , Toy Safety Sharp Edge Test Device
|
... intended for use by children under 8 years of age, and such edges exposed in normal use or as a result of reasonably forseeable damage or abuse of such toys and articles, present a potential risk of injury by laceration or avulsion. Standards: EN 71-1...
KingPo Technology Development Limited
|
Textile Toys Flammability Test Equipment as per EN71-2 Flammability Toy Safety
|
... requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard: -toys to be worn on the head: beards, moustaches, wigs, etc. made from...
Advanced Instruments Co.,Limited
|
Submit your “ss toys testing equipment” inquiry in a minute :