UL507 Fig 9.2 Stainless Steel Straight Unjoint Enclosure Protection Test Probe
|
...Stainless Steel Straight Unjoint Enclosure Protection Test Probe Product overview: The Joint Test Probe of Figure meets the standard requirements of UL507 Fig 9.2 (PA100A), IEC 62368-1:2018 clause 4.8, 5.3.2, 8.5.4.3, V.1.2 and figure V.1, etc., UL474 Fig 5.1, UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, UL6500 Fig14, UL60065 Fig14 and UL60950 Fig NAF.1. Technical Parameters: Probe material Stainless...
Sinuo Testing Equipment Co. , Limited
|
stainless steel Cone UL Test Probe Test Finger Probe UL1278 Fig 10.1
|
...Probe Conform to the UL1278 Fig 10.1 UL Test Probe Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon while the probe is made of stainless steel. Standard:UL1278 Fig 10.1. Application:The heating element and any part of the element assembly (such as an element support, sheath and similar parts) shall be so guarded that flammable material as well as persons will be protected...
Guangzhou HongCe Equipment Co., Ltd.
|
UL Standard Articulated Finger Probe For Enclosure Protection Test
|
... probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, ......
Dongguan Kingpo Technology Limited
|
IEC61032 Test Probe 32 Figure 15 For Enclosure Protection Test
|
... with nylon handle. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:It is used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). Parameters:...
shanghai kerang technology co ltd
|
Stainless Steel 2.5mm Test Finger Probe Rod IEC60529 For IP3 / Suffix C Code Test
|
...Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Test Rod meets IEC and EN Standards including IEC 60529 and IP3 and suffix C codes. The handle and stop face are made of delrin and the rod is made of stainless steel......
Pego Electronics (Yi Chun) Company Limited
|
IEC60884 Socket protective test probe with 1N and 20N force
|
...protective test probe with 1N and 20N force Product Description IEC60884 Socket protective test probe with 1N and 20N BND-14AB Technical Parameters: 1, Test Probe Length:80mm 2,Probe Diameter:1.0mm 3,Material:The handle is made of nylon, tip is made of hardened steel 4,Standard: IEC60884 ,IEC61032 Fig.10 1 Product Explanation The socket protection door test needle probe......
HongKong Bonad Technology Limited
|
Stainless Steel UL 2157 Test Finger Probe 4 Pieces One Kit Clause 6.1
|
... 1, figure 2, figure 3, and figure 4. Application: It is used for protection against accessibility to current-carrying parts. Test Finger Probe Parameter: Finger length Figure 1: 97mm Figure 2: 101.6mm Figure 3: 80mm Figure 4: 101.6mm Consist of: Figure 1...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Stainless Steel Eddy Current Testing Equipment Test Block 2 Years Warranty
|
...probe is fixed in the holder, which guarantee efficient and reliable inspection. R&D TMTeck has perfect production technology, consummate testing ways and strong R&D capability. From NDT portable instrument to large automatic detection system, TMTeck owns...
TMTeck Instrument Co., Ltd
|
Stainless Steel IEC 60335 Test Finger Probe 18 Ф8.6
|
IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children......
Guangzhou Shice Equipment Co., Ltd.
|
Ultra Fine 1.5mm Diameter Pt100 Stainless Steel Temperature Sensor With Probe
|
... 1000mm wire material fiberglass shielding wire Pictures temperature sensor PT100 Code Mark Use temperature Protection tube materials Class of accuracy and allowable error GME PT100 -200~500°C 304 321 316L Grade A: +/- (0.15+0.......
Wuhan Global Metal Engineering Co., Ltd
|
Submit your “stainless steel enclosure protection test probe” inquiry in a minute :