Stainless Steel Stirrer Test Finger Probe Φ40mm IEC60335-2-14
|
IEC60335-2-14 Stainless Steel Test Probe Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement. Appliance is checked by applying a ......
Guangzhou HongCe Equipment Co., Ltd.
|
Steel / Plastic Test Finger Probe Calibrated IEC60335 / IEC61032 / IEC60950
|
...Test Finger Probe and Short Test Pin Probe The test finger probe and short test pin probe are designed according to IEC61032 standard. The test finger probe is made of steel finger, baffle and insulated handle. The test finger probe is used to verify the basic protection against access to hazardous parts and also be used to verify the protection against access with finger......
Pego Electronics (Yi Chun) Company Limited
|
IEC 61851-1 Stainless Steel IPXXD Test Rob Probe D With 3 N Force
|
...verify the protection against access with a wire. Technical parameters: Model SN2210-4 SN2210-4T (Optional) Name Test rod probe D Test rod probe D with force Test Wire Diameter Ф1+0.05 0 (mm) Ф1+0.05 0 (mm) Stop Face Diameter SФ35±0.2 (mm) SФ35±0.2 (mm)...
Sinuo Testing Equipment Co. , Limited
|
IEC60335 Nylon Handle Cylindrical SS Test Finger Probe
|
IEC60335 Test Finger Probe Test Probe Nylon Handle Stainless steel Probe Standard: IEC60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.103. Standard description: Hand-held blenders shall incorporate......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC EN 50636 Figure 1 Test Finger Probe Hand Held Blower Sample
|
...simulate the young adult to test whether the hazardous parts can be touched. Test sample:Hand held power supply operation blower which is used in the garden and vacuum blower and other garden tools Feature:Nylon handle and stainless steel probe Parameters:...
Dongguan Kingpo Technology Limited
|
Nylon Stainless Steel Test Finger Probe 11 Of Iec 61032
|
...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test...
SKYLINE INSTRUMENTS CO.,LTD
|
Stainless Steel IEC 60335 Test Finger Probe 18 Ф8.6
|
IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children......
Guangzhou Shice Equipment Co., Ltd.
|
EN 50636 Figure 1 Test Finger Probe / Young Adult Stainless Steel Arm Probe
|
...Test Finger Probe Young Adult Arm Probe Stainless Steel Probe Standard description Our product of Test Finger Probe (see Figure 1)shall not to be able to make contact with the hazardous moving parts when it is inserted into the opening up to the entire length of each arm probe.the articulations of each probe shall be manufactured to enable a rotation±90° about the articulations axis.The movements of the joints of each probe...
KingPo Technology Development Limited
|
UL jointed test finger probe,articulated test finger probe,test probe
|
...UL jointed test finger probe This is the “UL” test finger, researched and designed by UL and required by most UL Standards. Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory available....
ALLIED TESTING (HK) CO.,LTD.
|
IP2X Test Finger Probe with 50N Thrust
|
... of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Jointed Test Finger was made on stainless steel and Polyamide handle. Material: Stainless Steel. Handle: Polyamide. Finish:...
HK LEE HING INDUSTRY CO., LIMITED
|
