Steel Stud Drywall Roll Forming Machine 0.4-0.8mm Galvanized Steel
|
... hot-dip galvanised sheet and rolled by cold-forming process. It is used for the decoration of non-load-bearing walls and building roofs finished with lightweight panels such as paper-faced gypsum ......
WUXI LINBAY MACHINERY CO.,LTD
|
Light Steel Stud Drywall Roll Forming Machine With Plastic Film Protection And Hydraulic Punching
|
...Steel Stud Roll Forming Machine With Plastic Film Protection And Hydraulic Punching These introductions refer only to the production line and configuration shown in the main image. Each machine is custom-built. Metalign welcomes your inquiry and provides the right production line—forming......
Cangzhou Metalign Machinery Co., Ltd.
|
Fast Speed Construction 30m/Min Steel Stud Profile Roll Forming Machine
|
... is 10-15m/min, also can design for 40-60m/min with non-stop punching and cutting depends on your production requirement. Dingbo drywall roll forming machine will be your...
Jiangyin Dingbo Technology CO., Ltd.
|
Adjustable Light Steel Keel Drywall Roll Forming Machine 0.4mm - 1.2mm 6m / Min
|
...Steel Keel Drywall Roll Forming Machine This machine is for a customer from Malaysia, thickness from 0.4mm-1.2mm, width 75mm, 100mm adjustable, it includes 5 sets of punching moulds. The machine includes 3 tons hydraulic decoiler, punching moulds, main roll forming machine......
Sussman Machinery(Wuxi) Co.,Ltd
|
C Stud, U Runner, U Track, Steel Stud / Track Roll Forming Machine With 0.4 - 1.0mm
|
...: 4KW Hydraulic power: 4KW Forming Station: about 10 steps ( adopt Italy Technology ) Axis Diameter: ¢ 70 mm Forming Speed: 0-15m/min Forming Frame Structure: Guiding Column + Slide Blocks; This forming frame structure design is much high precision than...
Wuxi Techwell Machinery Co., Ltd
|
Automatically steel Stud Cold Roll Forming Machine For Angle Ceiling Channel
|
...steel Stud Cold Roll Forming Machine For Angle Ceiling Channel Specification Stud and track cold roll forming machine for Angle ceiling Channel Equipment operation Automatically Voltage 380V,50/60Hz Thickness of material sheet 0.3--1.3mm(normally) Width of material sheet As drawing Control system By PLC(imported brand) Cutting method Hydraulic cutting Material of roller station Gcr12 with heat treatment Formed......
ZhongHeng Machine Manufacture Co.,Ltd
|
Fully Automatic Metal Steel Stud Rack Roll Forming Machine
|
... to run stably, adopts mould pressing shear to avoid hole deformation and improve product quality. The product is widely used in steel structure building purlin erection. Equipment Technical Requirements of...
Jiangsu Co-effort Mechanical&Electrical Technology Co., Ltd
|
Lip Channel C Shape Stud Drywall Roll Forming Machine With Punching Device
|
...Stud Roll Forming Machine with Punching Device C/R panel roll forming machine and slitting machine price could be made by one machine fully automatically in batch. The machine can do the production in the speed of 25 meter per minutes. The drawing profiles are customized.Here are some for reference. Machine components No. Name Qty 1 3tons Uncoiler 1 set 2 Feeding Device 1 set 3 Main Roll......
Taicang Global Machinery Co., Ltd.
|
U Channel Steel Stud Track Roll Forming Machine 20m / Min 5.5Kw
|
...plate, which is formed by cold-formed roll forming. It has the advantages of uniform wall thickness, excellent section performance, and high strength. It can save 30% of material compared with the traditional hot-rolled U-shaped steel of the same strength....
Jiangsu Lebron Machinery Technology Co., Ltd.
|
30M/MIN Drywall Roll Forming Machine Steel Cd Ud Profile Metal Section
|
Steel CD UD Profile Metal Section Stud And Track Roll Forming Machine For Drywall 1. Product profile: (1). Brief Introduction of C keel roll former stud and track interchangeable metal steel purline roll forming machine The Fully automatic high speed Suspended Ceiling T grid roll forming machine......
Cangzhou Best Machinery Co., Ltd
|
Submit your “steel stud drywall roll forming machine” inquiry in a minute :