IEC60598 SUS304 IPX3 IPX4 Spray Nozzle Tester 150L For LED Luminaires
|
...Spray Nozzle Test Equipment for Outdoor LED Luminaires 1. Introduction IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. The equipment is consisted by spray nozzle......
Pego Electronics (Yi Chun) Company Limited
|
IEC60529 Ingress Protection Test Equipment Figure 5 Handheld Brass Spray Nozzle Tester For IPX3 IPX4 121 Holes
|
... pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is conveniently positioned by the nozzle. The spray pattern of the nozzle is made to...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60529 IPX6 Spray Water Test Nozzle, IPX6 Spray Nozzle Tester, Water Jet Nozzle
|
...Spray Water Test Nozzle, IPX6 Spray Nozzle Tester, Water Jet Nozzle with Pressure Gauge Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The nozzles are made from stainless steel. Item IPX6 Water supply Water flow rate > 100L/min±5% clean water witho ut inclusion. It can be achieved by the stainless steel water tank and pressurized equipment. The nozzle......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC60529 IPX3 IPX4 Handheld Brass Spray Nozzle Tester
|
...Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is conveniently positioned by the nozzle. The spray pattern of the nozzle......
Dongguan Kingpo Technology Limited
|
IPX3 Ingress Protection Test Equipment , 121 Holes Water Spray Nozzle Tester
|
IPX3 IPX4 Hand Held Spray Nozzle IEC60529 IP Test Equipments Technical parameters: 1 Water supply Water flow rate is 50～150kpa clean water without inclusion. 2 Spray nozzle parameters external diameter: Ф102mM spherical diameter: SФ75.5mm There is a ......
Guangzhou Shice Equipment Co., Ltd.
|
45 ° Water Vapour Permeability Tester Specimens Spray Rate Tester 5kg
|
...Tester Specimens Spray Rate Tester 5kg Product Introduction Water Spray Tester consists of a metal frame that allows distilled water to be sprayed onto the specimen at 45 ° and 150 mm below the nozzle. Determination of surface moisture resistance of fabrics. It includes a metal frame that allows distilled water to be injected through the nozzle onto test specimens at 45 ° and 150 mm below the nozzle......
Haida Equipment Co., Ltd
|
SUS304 Salt Spray Test Chamber with Spray Nozzle 0.3mm~0.8mm
|
...Spray Test Chamber is a corrosion resistant polymer material tester designed to evaluate the corrosion resistance of industrial materials. This corrosion resistance tester is a great tool for quality control purposes in the industrial sector. It is designed with a test area ranging from 0.09m2 to 2.25m2, a spray distance between 30cm to 50cm, and a spray......
BOTO GROUP LTD
|
Easy operation desk type diesel nozzle tester with easy operation
|
DesktopNozzle Testersimple operation, and the nozzle tester has a recycling bottle which can be used for recycling the oil spray.Easy operation. Desktop Nozzle Tester adopts casting form production，base on the left with the fixed installation holes. ......
Taian North Test Equipment Factory
|
AATCC 22 Fabric Spray Rating Tester Water Repellent Spray Test
|
...Spray Rating Tester AATCC 22 Applications All kind of fabric Standards AATCC 22 BS EN 24920 BS 3702 ISO 4920 M&S P23 NEXT TM23 GB/T 4745 Product Instruction Spray Rating Tester determines the water repellent of specimen, pour 250ml of distilled water into the funnel of tester and allow it to spray from a nozzle down a distance 150mm to the specimen which already mounted on a 45° test hoop. Compare with spray......
Refond Equipment Co., Ltd.
|
TF160 Fabric Testing Equipment Spray Rating Tester To Evaluate Surface Wetting Resistance Of Fabrics
|
Spray Rating Tester , To Evaluate The Surface Wetting Resistance Of Fabrics With 19 Holes Nozzle Application Spray Rating Tester, is to determine the surface wetting resistance of fabrics, which may or may not have been given a water-resistant or water-repellent finish. Spray rating tester consists of a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below the nozzle......
TESTEX INSTRUMENT LTD
|
Submit your “sus304 spray nozzle tester” inquiry in a minute :