Carbon Mould Tool Steel Plate D3 1.2080 Heat Reisistant Fatigue Resistant
|
...P20, mold base frames normally separate into two sides at a parting line allowing manufactured parts to be extracted. PGI Steel makes molding plates from 4140 and 4340 steel, typically in the Rockwell hardness ranging from 28 – 32 to upward of 38 – 45....
Henan Jinbailai Industrial Co., Ltd.
|
20 - 1000mm Diameter Tool Steel Bar D3 / 1.2080 Grade With Wear Resistance
|
...13% chrome metal), So The Tool Steel D3 metal material with Very Very high wear resisting properties, heat treatment can be reached to 54-62 HRc. - D3 steel have nice wear resistant property. Even its hardness higher than D2 Steel. but toughness lower than...
SHANGHAI UNITE STEEL
|
1.2080 SKD1 D3 Cr12 Alloy Tool Steel Plate With High Hardenability Thickness 8-300mm
|
...2080 SKD1 D3 Cr12 Alloy Tool Steel Plate with High Hardenability AISI D3 cold work steel, also know as DIN 1.2080 (Werkstoff) and JIS SKD1, is a 12% chrome alloy steel. D3 cold work steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. Type AISI D3 cold works tool steel......
Guangzhou Changfeng Steel Co., LTD
|
D3 Cold Work Tool Steel Plate with grinding surface
|
...D3 Structural Steel plate DIN 1.2080 Material Steel Product Name mould steel/plastic mould steel/ tool steel/alloy steel/carbon steel/steel round bar /steel plate/special steel/die steel/mould base/cold work tool steel/hot work tool steel/ Length any size can custom-made Width any size can custom-made Thickness any size can custom-made Chemical composition Grade C Si Cr Mn P S DIN 1.2080......
DONGGUAN MISUNG MOULD STEEL CO.,LTD
|
low price hot rolled alloy tool steel round bar 1,2080 D3 for small orders
|
...tool steel round bar 1,2080 D3 for small orders Alloy Tool Steel Bar D3 Details Material:D3 steel round bar Relevant: D2, D3 Technique: forging,hot rolled, cold draw Surface: black, turned and ground,bright Diameter: 20 to 500mm Length: 2000 to 13000mm or customized Process: EAF + LF + VD + forged + heat treatment (annealed, normalized, Q+T)) Chemical Composition D3......
Tianjin J&H Steel Trading Co.,Ltd
|
Forged Cold Work Tool Steel GB Cr12 JIS SKD1 DIN 1.2080 ASTM D3
|
... JIS SKD1, is a 12% chrome alloy steel. D3 cold work steelhas very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not...
Evergrowing Resources Co., Ltd.
|
Aisi D3 Tool Steel Bar Suppliers Din 1.2080 X210cr12 Steel DIN EN X210Cr12 BS X210Cr12 AISI SAE
|
Die Steel Bar DIN/EN X210Cr12 BS X210Cr12 AISI/SAE D3 D3 is the cold work die steel with the most superior abrasiveness. The heat treatment effect is stable. Steel for deep drawing dies cold forging dies..... Resistance welding electrode: chromium-......
Wuxi Zhanlu International Trade Co., Ltd
|
Cold Work Tool Alloy Steel Seamless Pipes NC6 NC10 NC11 X210Cr12 1.2080 High Strength
|
..., form into bending, straightening rolls, etc. Technical specifications: PN EN Werkstoff nr AISI NC6 NC10 NC11 X210Cr12 1.2080 D3 NC11LV X153CrMoV12 1.2379 D2 NMV 90MnCrV8 1.2842 O2 NZ3 60WCrV8 1...
BEST PIPELINE EQUIPMENT CO.,LTD
|
6mm Shank Diamond Plated Mandrels For Internal Grinding
|
6mm Shank Diamond Plated Mandrels For Internal Grinding Shine Abrasives Diamond Plated Mandrels used for use on internal grinding of glass, ferro-ceramic, ceramic, cemented carbides and other hard and abrasive materials. Shine Abrasives CBN Plated Mandrels......
ZHENGZHOU SHINE ABRASIVES CO.,LTD
|
Skd11 Steel Alligator Shear Blades
|
...steel coil sheet H13K Alligator shear knife for Galvanizing Lines Senda carbon steel sheet Alligator blade are mainly applied to guillotine shears, flying shears and for metal cutting application in plate shearing factory with durable lifetime. Senda Alligator blade are manufactured from best quality alloy steels, tool steels. Up to 6000mm in length AISI D3......
Senda Group Co.，Ltd
|
Submit your “tool steel plate d3 1 2080” inquiry in a minute :