100:2 Mix Ratio Transparent Liquid Thixotropic Agent For RTV-2 Silicone Rubber
|
... the viscosity for two part liquid silicone. It can be used with condensation cure silicones. First at all add the catalyst to the base, then add 0.5-2 % of TA01 on the weight of the silicone rubber. Mix for 3-5 minutes, you get a very ......
MINGCHENG GROUP LIMITED
|
Textile Auxiliary Agents Colorless To Yellowish Transparent Liquid Softening Agent
|
...: 60% Solubility: Easily soluble in water Brief Description: The special product Softening Agent silicone smooth softener which is lower dosage than the traditional silicone oil products, it can endow the fabrics with non-hydrophilic effect, full and...
Yixing Cleanwater Chemicals Co.,Ltd.
|
Yellowlish Transparent Liquid Dispersing Agent For Dispersing Waterborne Pigments
|
...Transparent Liquid Dispersing Agent For Dispersing Waterborne Pigments Waterborne dispersing agent DR-190 is a high molecular weight block copolymer solution containing pigment affinity groups. Specification Item Value Appearance Light yellow transparent liquid Active content 90% (10% water) Viscosity(25℃) 300-800cs Flash point,℃ > 100 Density,20°c g/ml 1.06 Acid 10 mg KOH/g Performance: This agent......
ANHUI DERUN IMPORT & EXPORT TRADING CO., LTD
|
Colorless Transparent Liquid Curing Agent Isophoronediamine WANAMINE IPDA
|
... groups, attached to an isophorone backbone. IPDA is known for its high reactivity and is used as a curing agent for epoxy resins, a building block for polyurethanes, and in various coatings, adhesives, and sealants. Features: IPDA is a liquid with...
Guangdong DAHUA New Material Co.,Ltd
|
Colorless Transparent Liquid Methacrylatoethyl Trimethyl Ammonium Chloride/DMC CAS 5039-78-1 Chemical Auxiliary Agent
|
... Transparent Liquid Methacrylatoethyl Trimethyl Ammonium Chloride/DMC CAS 5039-78-1 Chemical Auxiliary Agent Introduction: Content: ≥78.0% Acid value: ≤0.2% Inhibitor: 950±50 ppm (MEHQ) Appearance: Colorless, transparent or light yellow liquid ......
Senzhuo Industry Co.,Ltd
|
DETDA (E100)LC CAS No.：68479-98-1 Transparent liquid
|
... agent for polyurethanes and epoxies. It is especially suitable for SPUA and RlM systems. It can also be used as an industrial lubricant and Antioxidant; DETDA-LC is stable in application initial and ......
Qingdao Exceed Fine Chemicals Co.,Ltd
|
DR001 Waterborne Drying Agent Brownish Red Transparent Liquid Appearance
|
.... It is suitable for water-borne epoxy ester, water-borne alkyd, etc. Product data: Project DR001 Appearance Brownish red transparent liquid Cobalt content 1.2%...
Xiamen WangQin Chemical Technology Co., Ltd.
|
LE-8516/LH-8516 Transparent Mould Release Agent Electrical Epoxy Resion Insulation
|
...-8516 is a modified weather-resistant acid anhydride hardener. Properties Unit Value Properties Unit Value Appearance Visual Transparent, light yellow, viscous liquid Appearance Visual Transparent, light yellow liquid Epoxy value Eq/kg 4.5-5.0...
Shanghai Wenyou Industry Co., Ltd.
|
FDA High Transparent Liquid Silicone Rubber Aging Resistance Button Parts
|
...-catalyzed. It has excellent resistance to water, oil, chemical and weathering, and is FDA compliant. It has a wide range of hardness, from 20 to 70 Shore A. Transparent Liquid Silicone Rubber is widely used in automotive parts...
Guangzhou Ruihe New Material Technology Co., Ltd
|
Viscous Liquid Curing Agent Epoxy , Insulation Resin For Sealed Embedded Poles
|
Viscous Liquid Curing Agent Epoxy Resin For Sealed Embedded Poles TDS: JT 8622A Epoxy Resin 100 pbw JT 8622 Epoxy Hardener 80 pbw Silica filler(Silanised treated) 300 pbw Liquid, Hot-curing cast resin system for outdoor electrical insulation material for ......
JIANGTE INSULATION COMPOSITE
|
Submit your “transparent liquid thixotropic agent” inquiry in a minute :